EMU4-LM outputs data file at following timing. 1. When inserting the SD memory card while operating. 2. When power

Refer to the below table as to current sensor usable for EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-A2, EMU4-

It is possible to extend using an extension cable (Model: EMU2-CB-T1M, EMU2-CB-T5M, EMU2-CB-T10M). Secure the total le

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and M

It will stop outputting logging data from the Logging Unit. [SD C.] LED will be high-speed blinking （repeat of 0.25sec

It measures from 0kWh(MWh) after going round. Integer 4 digits ： 9999.98→9999.99→0000.00→0000.01kWh(MWh) Integer 5

MEASURE LED lights while measuring electric power over 0.4% of the total load power. Check below points: 1. Is voltage

Logging period of the optional SD memory card (EMU4-SD2GB) is according to the logging cycle of detail data and the numb

Setting different logging ID enables that one SD memory card can be used for several Logging Units. Settable logging ID

Sample programs are described in Programming Manual. Please refer to suitable programming manual depending on CC-Link v

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Energy Saving Supporting Devices > Energy Saving Supporting Devices

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Energy Saving Supporting Devices

FAQ within [ Energy Saving Supporting Devices ]

11-20 of Total 47

prev 2 / 5page next

As to timing for outputting data file into the SD memory card.

EMU4-LM outputs data file at following timing. 1. When inserting the SD memory card while operating. 2. When power is ON in a state of the SD memory ca... More Details >>
- No：22133
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to the current sensor usable for the EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-A2, EMU4-VA2).

Refer to the below table as to current sensor usable for EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-A2, EMU4-VA2). *2. It will conform to UL st... More Details >>
- No：22130
- Release Date：2018/08/27 16:41
- Update：2018/09/07 12:54
- Category： Energy Measuring Units
Extension of cable of the Display Unit (Model: EMU4-D65).

It is possible to extend using an extension cable (Model: EMU2-CB-T1M, EMU2-CB-T5M, EMU2-CB-T10M). Secure the total length of the extension cable is less t... More Details >>
- No：22122
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
Sample program for MODBUS RTU communication(EcoMonitorPlus/EcoMonitorLight)

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications (LSPY-9025) and MODBUS Interface soecifications(LSPY-9... More Details >>
- No：24806
- Release Date：2019/03/27 12:12
- Category： Energy Measuring Units
As to action upon memory shortage of the SD memory card.

It will stop outputting logging data from the Logging Unit. [SD C.] LED will be high-speed blinking （repeat of 0.25sec ON → 0.25sec OFF）. Backup the data ... More Details >>
- No：22135
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to indication of the measurement value of the electric energy　(EcoMonitorPlus/Light).

It measures from 0kWh(MWh) after going round. Integer 4 digits ： 9999.98→9999.99→0000.00→0000.01kWh(MWh) Integer 5 digits ： 99999.8→99999.9→00000.0→0000... More Details >>
- No：22131
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
MEASURE LED not blink (EcoMonitorPlus).

MEASURE LED lights while measuring electric power over 0.4% of the total load power. Check below points: 1. Is voltage wiring connected? 2. Are the trans... More Details >>
- No：22144
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to logging period of the optional SD memory card (EMU4-SD2GB).

Logging period of the optional SD memory card (EMU4-SD2GB) is according to the logging cycle of detail data and the number of measuring circuits. * It is ... More Details >>
- No：22136
- Release Date：2018/08/27 16:41
- Update：2018/09/07 12:48
- Category： Energy Measuring Units
As to using SD memory card at multiple locations.

Setting different logging ID enables that one SD memory card can be used for several Logging Units. Settable logging ID is 1 to 255. More Details >>
- No：22132
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
Sample program for CC-LINK communication （EcoMonitorPlus／EcoMonitorLight）

Sample programs are described in Programming Manual. Please refer to suitable programming manual depending on CC-Link version which you use. ・Energy Measur... More Details >>
- No：24803
- Release Date：2019/03/27 12:12
- Category： Energy Measuring Units

11-20 of Total 47

Inquiries

page top