Logging period of the internal memory of the main unit as following: 1. In case of detailed data Logging period differ

The function calculates the value of each measurement element of voltage, power factor by inputting only current using s

The timing for ejecting an SD memory card is specified as below table according to the state of the [SD C.] LED of the L

Using Logging Unit Utility (free software), it is able to create a daily/monthly report using logging data acquired by t

As shown in the figure below, a current transformer (CT) with a secondary current of 5A is attached to the measurement l

Following causes are assumed for the error. 1. Wrong orientation of the sensor? 2. 1-side and 3-side of the sensor a

Since location of the decimal point or units of the measured value displayed is decided by Total load power, it is impos

Refer to the below table as to Zero-Phase Current Transformer usable for EcoMonitorPlus (Model: EMU4-LG1-MB). Note th

A dedicated Display Unit (Model: EMU4-D65) is used to set the EcoMonitorPlus (Model ：EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1

Basic Unit manufactured in October 2016 or before is version A, which has restrictions on usage. The connectable number

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Energy Saving Supporting Devices > Energy Saving Supporting Devices

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Energy Saving Supporting Devices

FAQ within [ Energy Saving Supporting Devices ]

21-30 of Total 47

prev 3 / 5page next

As to logging period of the internal memory of the main unit.

Logging period of the internal memory of the main unit as following: 1. In case of detailed data Logging period differs according to logging cycle for deta... More Details >>
- No：22137
- Release Date：2018/08/27 16:41
- Update：2018/09/07 12:43
- Category： Energy Measuring Units
As to simple measuring function of the EcoMonitorPlus (Model: EMU4-BM1-MB、EMU4-HM1-MB、EMU4-A2、EMU4-VA2).

The function calculates the value of each measurement element of voltage, power factor by inputting only current using setting value. This function is used... More Details >>
- No：22127
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to ejecting an SD memory card.

The timing for ejecting an SD memory card is specified as below table according to the state of the [SD C.] LED of the Logging Unit for the Energy Measuring ... More Details >>
- No：22121
- Release Date：2018/08/27 16:41
- Update：2018/09/07 13:04
- Category： Energy Measuring Units
Method for creating a daily/monthly report using logging data (Model: EMU4-LM).

Using Logging Unit Utility (free software), it is able to create a daily/monthly report using logging data acquired by the Logging Unit for the Energy Measur... More Details >>
- No：22120
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
How to measure circuits over 600A (EcoMonitorPlus / Light)

As shown in the figure below, a current transformer (CT) with a secondary current of 5A is attached to the measurement location, and a split-type current sen... More Details >>
- No：38042
- Release Date：2021/02/25 17:54
- Category： Energy Measuring Units
Cause of "minus" indication for electric power value (EcoMonitorPlus/Light).

Following causes are assumed for the error. 1. Wrong orientation of the sensor? 2. 1-side and 3-side of the sensor are reversed? 3. Is connection betwe... More Details >>
- No：22143
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to changing location of the decimal point and units of the measured value.

Since location of the decimal point or units of the measured value displayed is decided by Total load power, it is impossible to change location of the decim... More Details >>
- No：22139
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
As to Zero-Phase Current Transformer (ZCT) usable for the EcoMonitorPlus (Model: EMU4-LG1-MB).

Refer to the below table as to Zero-Phase Current Transformer usable for EcoMonitorPlus (Model: EMU4-LG1-MB). Note that the one made by another company is... More Details >>
- No：22129
- Release Date：2018/08/27 16:41
- Update：2018/08/31 14:17
- Category： Energy Measuring Units
As to settings for EcoMonitorPlus (Model: EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB, EMU4-A2, EMU4-VA2, EMU4-AX4, EMU4-PX4).

A dedicated Display Unit (Model: EMU4-D65) is used to set the EcoMonitorPlus (Model ：EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB, EMU4-A2, EMU4-VA2, EMU4-AX4, EMU... More Details >>
- No：22128
- Release Date：2018/08/27 16:41
- Category： Energy Measuring Units
[EcoMonitorPlus] Caution when you are using Basic Unit (Model: EMU4-BM1-MB, EMU4-HM1-MB, or EMU4-LG1-MB) manufactured in October 2016 or before

Basic Unit manufactured in October 2016 or before is version A, which has restrictions on usage. The connectable number of extension units is two, not three ... More Details >>
- No：38008
- Release Date：2020/11/12 13:02
- Category： Energy Measuring Units

21-30 of Total 47

Inquiries

page top