You can check the LOT. on the front of the controller or the nameplate on the right side. Verifying on the front of the

The MX-F Model has two built-in Ethernet ports. In the following, the Ethernet port (P1) is referred to as P1 and the Et

The following intelligent function modules have restrictions on the number of modules that can be connected.

Programming is possible with GX Works3. The supported version is 1.115V or later.

The maximum number of input/output points is 512. The number of remote I/O points is not limited, but can be used within

The program cache memory (capacity) of the MX-F model is 12 MB. ※12 MB is equivalent to over 200K steps.

On the MX-F Model, the Performance Monitor function enables Program List Monitor. The operation cycle and load status o

The MX-F Model also supports the built-in high-speed counter function. The number of channels is up to 8, and the counte

Please refer to the below Technical bulletin for the functional differences between the MX-F model and the iQ-F series.

It's possible. In GX Works3, select [Project] → [Change Module Type/Operation Mode], and select the Series: MX controlle

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Automation Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Automation Controllers MELSEC

MELSEC MX Controller Engineering Software

FAQ within [ Programmable Automation Controllers MELSEC ]

1-10 of Total 28

prev 1 / 3page next

Regarding how to check the date of manufacture

You can check the LOT. on the front of the controller or the nameplate on the right side. Verifying on the front of the Controller Nameplate verification... More Details >>
- No：44968
- Release Date：2025/05/08 09:05
- Category： MELSEC MX Controller MX-F Model
Regarding the default IP address

The MX-F Model has two built-in Ethernet ports. In the following, the Ethernet port (P1) is referred to as P1 and the Ethernet port (P2) as P2. *P2 selects... More Details >>
- No：44981
- Release Date：2025/05/08 09:02
- Category： MELSEC MX Controller MX-F Model
Regarding Intelligent Function Modules with connectivity constraints

The following intelligent function modules have restrictions on the number of modules that can be connected. More Details >>
- No：44984
- Release Date：2025/05/08 09:07
- Category： MELSEC MX Controller MX-F Model
Regarding programming tools

Programming is possible with GX Works3. The supported version is 1.115V or later. More Details >>
- No：44962
- Release Date：2025/05/08 09:05
- Category： MELSEC MX Controller MX-F Model
Regarding maximum number of input/output points

The maximum number of input/output points is 512. The number of remote I/O points is not limited, but can be used within the specification range of each int... More Details >>
- No：44971
- Release Date：2025/05/08 09:07
- Category： MELSEC MX Controller MX-F Model
Regarding program capacity

The program cache memory (capacity) of the MX-F model is 12 MB. ※12 MB is equivalent to over 200K steps. More Details >>
- No：44990
- Release Date：2025/05/08 09:09
- Category： MELSEC MX Controller MX-F Model
Regarding the Program List Monitor

On the MX-F Model, the Performance Monitor function enables Program List Monitor. The operation cycle and load status of the core can be visualized. More Details >>
- No：44989
- Release Date：2025/05/08 09:08
- Category： MELSEC MX Controller MX-F Model
Regarding built-in high-speed counter function

The MX-F Model also supports the built-in high-speed counter function. The number of channels is up to 8, and the counter types supported are 1-phase 1-inpu... More Details >>
- No：44980
- Release Date：2025/05/08 09:08
- Category： MELSEC MX Controller MX-F Model
Regarding functional differences from iQ-F Series

Please refer to the below Technical bulletin for the functional differences between the MX-F model and the iQ-F series. [Technical bulletin] ・Differences ... More Details >>
- No：44979
- Release Date：2025/06/18 14:38
- Category： MELSEC MX Controller MX-F Model
Regarding iQ-F Series Project Conversion

It's possible. In GX Works3, select [Project] → [Change Module Type/Operation Mode], and select the Series: MX controller, Type/Model: MXF100, Number of Axes... More Details >>
- No：44987
- Release Date：2025/05/08 09:09
- Category： MELSEC MX Controller MX-F Model

1-10 of Total 28

Inquiries

page top