The MX-F Model also supports the built-in high-speed counter function. The number of channels is up to 8, and the count

Please refer to the below Technical bulletin for the functional differences between the MX-F model and the iQ-F series.

The built-in motion function of the MX-F Model is programmed using motion control FB, wheareas the FX5-40/80SSC-G of the

The maximum number of input/output points is 512. The number of remote I/O points is not limited, but can be used withi

It's possible. In GX Works3, select [Project] → [Change Module Type/Operation Mode], and select the Series: MX controlle

The Ethernet port (P2) has 32 connections. The breakdown is as follows: total of MELSOFT connections, SLMP, and socket

Port 1 becomes the CC-Link IE TSN, and port 2 can be switched between Ethernet and CC-Link IE TSN. To use port 2 as an

You can check the LOT. on the front of the controller or the nameplate on the right side. Verifying on the front of the

The following intelligent function modules have restrictions on the number of modules that can be connected.

The MX-F Model has two built-in Ethernet ports. In the following, the Ethernet port (P1) is referred to as P1 and the E

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Automation Controllers MELSEC > MELSEC MX Controller MX-F Model

FAQ

Inquiries

Keyword Search

Keyword Search：

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ
Controllers
Programmable Automation Controllers MELSEC
MELSEC MX Controller MX-F Model

FAQ within [ MELSEC MX Controller MX-F Model ]

1-10 of Total 28

prev 1 / 3page next

Regarding built-in high-speed counter function

The MX-F Model also supports the built-in high-speed counter function. The number of channels is up to 8, and the counter types supported are 1-phase 1-inpu... More Details >>
- No：44980
- Release Date：2025/05/08 09:08
Regarding functional differences from iQ-F Series

Please refer to the below Technical bulletin for the functional differences between the MX-F model and the iQ-F series. [Technical bulletin] ・Differences ... More Details >>
- No：44979
- Release Date：2025/06/18 14:38
Regarding the built-in motion function

The built-in motion function of the MX-F Model is programmed using motion control FB, wheareas the FX5-40/80SSC-G of the iQ-F series is programmed using buff... More Details >>
- No：44970
- Release Date：2025/06/18 14:38
Regarding maximum number of input/output points

The maximum number of input/output points is 512. The number of remote I/O points is not limited, but can be used within the specification range of each int... More Details >>
- No：44971
- Release Date：2025/05/08 09:07
Regarding iQ-F Series Project Conversion

It's possible. In GX Works3, select [Project] → [Change Module Type/Operation Mode], and select the Series: MX controller, Type/Model: MXF100, Number of Axes... More Details >>
- No：44987
- Release Date：2025/05/08 09:09
Regarding number of internal Ethernet port connections

The Ethernet port (P2) has 32 connections. The breakdown is as follows: total of MELSOFT connections, SLMP, and socket communications ≦ 32 connections. Apa... More Details >>
- No：44974
- Release Date：2025/05/08 09:07
Regarding built-in ethernet port differences

Port 1 becomes the CC-Link IE TSN, and port 2 can be switched between Ethernet and CC-Link IE TSN. To use port 2 as an Ethernet port, set the Built-in Netwo... More Details >>
- No：44969
- Release Date：2025/05/08 09:05
Regarding how to check the date of manufacture

You can check the LOT. on the front of the controller or the nameplate on the right side. Verifying on the front of the Controller Nameplate verification... More Details >>
- No：44968
- Release Date：2025/05/08 09:05
Regarding Intelligent Function Modules with connectivity constraints

The following intelligent function modules have restrictions on the number of modules that can be connected. More Details >>
- No：44984
- Release Date：2025/05/08 09:07
Regarding the default IP address

The MX-F Model has two built-in Ethernet ports. In the following, the Ethernet port (P1) is referred to as P1 and the Ethernet port (P2) as P2. *P2 selects... More Details >>
- No：44981
- Release Date：2025/05/08 09:02

1-10 of Total 28

Inquiries

page top