The FX3G series does not support the index modifier for the bit devices. The FX3U/FX3UC series supports this function.

Power off and on the programmable controller again after the communication setting is changed.

The non-protocol communication can be set by the following two methods: (1) setting parameters using a programming tool,

The communication format can be set in the communication setting of a sequence program or "PLC Parameter setting" using

To establish communications between the programmable controller and GX Developer, clear the communication setting. (The

Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check cu

Yes.Beginning with the device in the "Device/Label Automatic-Assign Setting" window, devices are assigned in descending

When a personal computer (GX Works2) is connected to the RS-232C port of a programmable controller, communications betwe

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits from

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > Engineering Software

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Engineering Software ]

91-100 of Total 129

prev 10 / 13page next

Index modifier of bit devices in the FX3G series

The FX3G series does not support the index modifier for the bit devices. The FX3U/FX3UC series supports this function. More Details >>
- No：24959
- Release Date：2019/04/18 14:35
Reflecting the changes in the communication setting

Power off and on the programmable controller again after the communication setting is changed. More Details >>
- No：25006
- Release Date：2019/04/23 11:11
Communication setting methods when the FX3U-232-BD is used

The non-protocol communication can be set by the following two methods: (1) setting parameters using a programming tool, such as GX Works2, or (2) writing da... More Details >>
- No：24773
- Release Date：2019/02/27 15:24
Communication format setting

The communication format can be set in the communication setting of a sequence program or "PLC Parameter setting" using GX Developer. To avoid setting troub... More Details >>
- No：24929
- Release Date：2019/04/17 11:42
No communication between a programmable controller and a personal computer (GX Developer) after the communication parameters for the RS-232C communication equipment are set

To establish communications between the programmable controller and GX Developer, clear the communication setting. (The communication setting register value ... More Details >>
- No：24876
- Release Date：2019/04/15 08:07
Special auxiliary relay which is always on (MELSEC-F)

M8000 More Details >>
- No：22258
- Release Date：2018/08/30 13:48
Scan time while operation of a programmable controller CPU is being monitored using GX Works2

Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check current scan time, monitor the data in... More Details >>
- No：24779
- Release Date：2019/02/27 15:58
Automatically assigned devices in GX Works2

Yes.Beginning with the device in the "Device/Label Automatic-Assign Setting" window, devices are assigned in descending order (from the greatest device numbe... More Details >>
- No：22846
- Release Date：2018/09/03 17:30
Communications with a personal computer after the communication parameters for the RS-232C communication equipment are set

When a personal computer (GX Works2) is connected to the RS-232C port of a programmable controller, communications between the personal computer and the prog... More Details >>
- No：24782
- Release Date：2019/02/27 16:10
Assignment of input/output numbers (MELSEC-F series)

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits from 0 to 7 → from 10 to 17 → from 20 to... More Details >>
- No：24868
- Release Date：2019/04/15 08:06

91-100 of Total 129

Inquiries

page top