It is necessary to select the size of the reduction gear section that has mechanical strength equivalent to the output c

EISA : Energy Independence Security Act (NEMA MG1-12-12) was enacted in June 2016, and the regulation standards of the U

We support the primary diagnosis of products and arrangements of spare parts. We do not provide product training or repa

We offer supports globally. Please make any inquiries to one of our FA centers attached to our local offices.

For elevator applications, please use Direct current braking method that has the shortest coasting time so that there is

To prevent gear wear and bearing failures due to inadequate lubrication for oil lubrication-type models (GM-D and LJ), r

Air pressure falls by about 100 hPa for every 1,000 meters higher you go. This results in the air becomes thinner and a

EN standard is a unified standard concerning safety in Europe, takes precedence over the regulations and standards of ea

In the standard specification, we do not manufacture the brake power supply 480V specification.The motor power supply 48

As of April 2018, there are no high-efficiency standards.However, there is a movement to start regulation with capacity

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Geared Motors > Geared Motors Right angle shaft type

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Geared Motors Right angle shaft type ]

11-20 of Total 26

prev 2 / 3page next

Regarding service factors

It is necessary to select the size of the reduction gear section that has mechanical strength equivalent to the output converted to steady load condition tak... More Details >>
- No：20779
- Release Date：2018/08/21 16:10
About supporting high-efficiency standards in the U.S. for geared motors

EISA : Energy Independence Security Act (NEMA MG1-12-12) was enacted in June 2016, and the regulation standards of the United States became NEMA Premium (IE3... More Details >>
- No：20767
- Release Date：2018/08/21 16:10
- Update：2018/09/04 17:20
Overseas support

We support the primary diagnosis of products and arrangements of spare parts. We do not provide product training or repair support. More Details >>
- No：20783
- Release Date：2018/08/21 16:10
- Update：2018/09/03 14:09
Overseas support

We offer supports globally. Please make any inquiries to one of our FA centers attached to our local offices. More Details >>
- No：20782
- Release Date：2018/08/21 16:10
Brake connections in the case of use with elevating machines

For elevator applications, please use Direct current braking method that has the shortest coasting time so that there is no load drop due to the delay in bra... More Details >>
- No：20774
- Release Date：2018/08/21 16:10
- Update：2018/09/07 12:43
Range of possible frequencies that can be used when operating oil lubricated models with the inverter drive

To prevent gear wear and bearing failures due to inadequate lubrication for oil lubrication-type models (GM-D and LJ), restrictions are placed on the frequen... More Details >>
- No：20772
- Release Date：2018/08/21 16:10
Regarding altitude restrictions

Air pressure falls by about 100 hPa for every 1,000 meters higher you go. This results in the air becomes thinner and a drop in cooling capacity. This can re... More Details >>
- No：20781
- Release Date：2018/08/21 16:10
About complying with EN standard

EN standard is a unified standard concerning safety in Europe, takes precedence over the regulations and standards of each European countries. The manufactur... More Details >>
- No：20769
- Release Date：2018/08/21 16:10
- Update：2018/09/04 14:16
About the AC 480V brake power supply specification

In the standard specification, we do not manufacture the brake power supply 480V specification.The motor power supply 480V specification products are shipped... More Details >>
- No：20762
- Release Date：2018/08/21 16:10
High-efficiency standards in foreign countries

As of April 2018, there are no high-efficiency standards.However, there is a movement to start regulation with capacity of 0.12kW or more from 2020, so you h... More Details >>
- No：20785
- Release Date：2018/08/21 16:10

11-20 of Total 26

Inquiries

page top