Please refer to the section "Terminal box installation location and direction of lead wire outlet" of the general catalo

EISA : Energy Independence Security Act (NEMA MG1-12-12) was enacted in June 2016, and the regulation standards of the U

EN standard is a unified standard concerning safety in Europe, takes precedence over the regulations and standards of ea

When the geared motor is being operated by inverter drive, please do not make connections to the secondary side of the i

For elevator applications, please use Direct current braking method that has the shortest coasting time so that there is

It is necessary to select the size of the reduction gear section that has mechanical strength equivalent to the output c

We support the primary diagnosis of products and arrangements of spare parts. We do not provide product training or rep

Geared motors are not subject to the regulations because they are products integrated with the reducers. However, when

The braking method of the geared motor with a built-in brake is a frictional disk type direct current electromagnetic br

Air pressure falls by about 100 hPa for every 1,000 meters higher you go. This results in the air becomes thinner and a

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Geared Motors > S-PM Geared Motors Parallel shaft type

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ S-PM Geared Motors Parallel shaft type ]

1-10 of Total 18

prev 1 / 2page next

About changing the direction of the cable entrance for the terminal box

Please refer to the section "Terminal box installation location and direction of lead wire outlet" of the general catalogue. However, GM-J2 series is not su... More Details >>
- No：20763
- Release Date：2018/08/21 16:10
- Update：2018/09/04 15:06
About supporting high-efficiency standards in the U.S. for geared motors

EISA : Energy Independence Security Act (NEMA MG1-12-12) was enacted in June 2016, and the regulation standards of the United States became NEMA Premium (IE3... More Details >>
- No：20767
- Release Date：2018/08/21 16:10
- Update：2018/09/04 17:20
About complying with EN standard

EN standard is a unified standard concerning safety in Europe, takes precedence over the regulations and standards of each European countries. The manufactur... More Details >>
- No：20769
- Release Date：2018/08/21 16:10
- Update：2018/09/04 14:16
Regarding the brake wiring for when the inverter drive is in use.

When the geared motor is being operated by inverter drive, please do not make connections to the secondary side of the inverter. As for the brake wiring, ple... More Details >>
- No：20773
- Release Date：2018/08/21 16:10
- Update：2018/09/07 14:35
Brake connections in the case of use with elevating machines

For elevator applications, please use Direct current braking method that has the shortest coasting time so that there is no load drop due to the delay in bra... More Details >>
- No：20774
- Release Date：2018/08/21 16:10
- Update：2018/09/07 12:43
Regarding service factors

It is necessary to select the size of the reduction gear section that has mechanical strength equivalent to the output converted to steady load condition tak... More Details >>
- No：20779
- Release Date：2018/08/21 16:10
Overseas support

We support the primary diagnosis of products and arrangements of spare parts. We do not provide product training or repair support. More Details >>
- No：20783
- Release Date：2018/08/21 16:10
- Update：2018/09/03 14:09
High-efficiency standards in foreign countries

Geared motors are not subject to the regulations because they are products integrated with the reducers. However, when geared motors are used for pumps and ... More Details >>
- No：20786
- Release Date：2018/08/21 16:10
- Update：2018/08/31 12:37
Brake operation when electrical power is on or off

The braking method of the geared motor with a built-in brake is a frictional disk type direct current electromagnetic brake, non-excitation braking method (s... More Details >>
- No：20776
- Release Date：2018/08/21 16:10
Regarding altitude restrictions

Air pressure falls by about 100 hPa for every 1,000 meters higher you go. This results in the air becomes thinner and a drop in cooling capacity. This can re... More Details >>
- No：20781
- Release Date：2018/08/21 16:10

1-10 of Total 18

Inquiries

page top