FAQ
FAQAbout Products
- FAQ > Drive Products > Geared Motors > S-PM Geared Motors Right angle shaft type
FAQ
Keyword Search
FAQ within [ S-PM Geared Motors Right angle shaft type ]
-
Regarding the length of the key to be inserted in the hollow shaft of right angle shaft type.
The key size to be inserted into the hollow geared motor should be nearly twice the length of the hollow shaft hole diameter. In the case of the GM-SSY wi... More Details >>
- No:20761
- Release Date:2018/08/21 16:10
- Update:2018/09/05 15:50
-
It is necessary to select the size of the reduction gear section that has mechanical strength equivalent to the output converted to steady load condition tak... More Details >>
- No:20779
- Release Date:2018/08/21 16:10
-
High-efficiency standards in foreign countries
As of April 2018, there are no high-efficiency standards.However, there is a movement to start regulation with capacity of 0.12kW or more from 2020, so you h... More Details >>
- No:20785
- Release Date:2018/08/21 16:10
-
High-efficiency standards in foreign countries
Geared motors are not subject to the regulations because they are products integrated with the reducers. However, when geared motors are used for pumps and ... More Details >>
- No:20786
- Release Date:2018/08/21 16:10
- Update:2018/08/31 12:37
-
We support the primary diagnosis of products and arrangements of spare parts. We do not provide product training or repair support. More Details >>
- No:20783
- Release Date:2018/08/21 16:10
- Update:2018/09/03 14:09
-
About complying with EN standard
EN standard is a unified standard concerning safety in Europe, takes precedence over the regulations and standards of each European countries. The manufactur... More Details >>
- No:20769
- Release Date:2018/08/21 16:10
- Update:2018/09/04 14:16
-
Brake operation when electrical power is on or off
The braking method of the geared motor with a built-in brake is a frictional disk type direct current electromagnetic brake, non-excitation braking method (s... More Details >>
- No:20776
- Release Date:2018/08/21 16:10
-
Regarding altitude restrictions
Air pressure falls by about 100 hPa for every 1,000 meters higher you go. This results in the air becomes thinner and a drop in cooling capacity. This can re... More Details >>
- No:20781
- Release Date:2018/08/21 16:10
-
Products get exposed to environments of elevated humidity when they pass through tropical areas. We do varnish processing to prevent insulation degradation. ... More Details >>
- No:20764
- Release Date:2018/08/21 16:10
- Update:2018/09/04 16:20
-
Regarding the overexcitation phenomenon at no load
A motor's current of electricity comprises the torque's current, which is proportional to the exciting current and load torque for generating a rotating magn... More Details >>
- No:20771
- Release Date:2018/08/21 16:10
1-10 of Total 20