Specify the target axes during operation, and execute the following speed change request instruction. (1) Motion SFC pro

Yes, they are included.In addition, a battery (Q6BAT) is also included.

The following shows the specification for the PLC CPU area. Q170MSCPU: Equivalent to PLC CPU "Q03UDCPU" • Pro

Specify the target axes during operation, and execute the following speed change request instruction. (1) Motion SFC pro

The PCPU READY complete flag (SM500) turns ON when no error is detected in the fixed parameters, servo parameters, and l

Minor error 120 occurs in the following case:The zero pass signal (M2406+20n) is OFF when the re-movement to the home po

Specify the target axes during operation, and execute the following speed change request instruction. (1) Motion SFC pro

Because the rapid stop deceleration time is larger than the deceleration time.Set the rapid stop deceleration time withi

Alarm 2149 (Main circuit OFF warning) occurs when the servo system turns ON with no power supplied to the servo main cir

No, the time cannot be changed during operation. (Note): The following is the modules that support the acceleration/dec

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Motion Controllers > MELSEC-Q Series > Motion Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Motion Controllers

FAQ within [ Motion Controllers ]

1-10 of Total 24

prev 1 / 3page next

Speed change during operation

Specify the target axes during operation, and execute the following speed change request instruction. (1) Motion SFC program Speed change request CHGV, CHGVS... More Details >>
- No：23574
- Release Date：2018/09/14 15:09
- Category： Q17nDSCPU , Q170MSCPU
Battery holder unit

Yes, they are included.In addition, a battery (Q6BAT) is also included. More Details >>
- No：23576
- Release Date：2018/09/14 15:09
- Category： Q17nDCPU
CUP type of stand-alone Motion controller

The following shows the specification for the PLC CPU area. Q170MSCPU: Equivalent to PLC CPU "Q03UDCPU" • Program capacity: 30k steps • LD instruction proces... More Details >>
- No：23578
- Release Date：2018/09/14 15:09
- Category： Q170MSCPU , Q170MCPU
Speed change during operation

Specify the target axes during operation, and execute the following speed change request instruction. (1) Motion SFC program/Motion program Speed change requ... More Details >>
- No：23573
- Release Date：2018/09/14 15:09
- Category： Q17nDCPU , Q170MCPU
PCPU READY complete flag (SM500)

The PCPU READY complete flag (SM500) turns ON when no error is detected in the fixed parameters, servo parameters, and limit switch output data, which are ch... More Details >>
- No：23564
- Release Date：2018/09/14 15:09
- Category： Q17nDSCPU , Q17nDCPU , Q170MSCPU , Q170MCPU
Minor error120

Minor error 120 occurs in the following case:The zero pass signal (M2406+20n) is OFF when the re-movement to the home position is performed by proximity dog,... More Details >>
- No：23559
- Release Date：2018/09/14 15:09
- Category： Q17nDSCPU , Q17nDCPU , Q170MSCPU , Q170MCPU , Q17nHCPU , Q17nCPUN
Speed change during operation

Specify the target axes during operation, and execute the following speed change request instruction. (1) Motion SFC program/Motion program Speed change requ... More Details >>
- No：23572
- Release Date：2018/09/14 15:09
- Category： Q17nHCPU , Q17nCPUN
Deceleration stop

Because the rapid stop deceleration time is larger than the deceleration time.Set the rapid stop deceleration time within the range of 1 to the deceleration ... More Details >>
- No：23550
- Release Date：2018/09/14 15:09
- Category： Q17nDSCPU , Q17nDCPU , Q170MSCPU , Q170MCPU
Alarm 2149

Alarm 2149 (Main circuit OFF warning) occurs when the servo system turns ON with no power supplied to the servo main circuit. Review the condition of servo O... More Details >>
- No：23566
- Release Date：2018/09/14 15:09
- Category： Q17nDSCPU , Q17nDCPU , Q170MSCPU , Q170MCPU , Q17nHCPU , Q17nCPUN
Acceleration/deceleration time change

No, the time cannot be changed during operation. (Note): The following is the modules that support the acceleration/deceleration change function. • Q17nDSCP... More Details >>
- No：23570
- Release Date：2018/09/14 15:09
- Category： Q17nDCPU , Q170MCPU , Q17nHCPU , Q17nCPUN

1-10 of Total 24

Inquiries

page top