When multiple programs are executed, the processing time (program switching time) becomes "Number of program files × 0.9

An input and output use a single I/O number. (This is the same as QH42P.) When you replace a module that uses serial I/O

The inter-module synchronization function synchronizes the timing to control signals of multiple modules. This function

You can configure the setting in "Interrupt Setting from Internal Timer" of the CPU parameter. <Interrupt period set

No connector is provided with the module. Separately prepare any of the following connectors. A6CON1: Soldering type 32-

Set modules in a module configuration diagram with GX Works3 and configure the inter-module synchronization setting. [N

You can use a Q series 18-point screw terminal block with a MELSEC iQ-R series terminal block type I/O module or analog

You cannot mount Q series modules on a MELSEC iQ-R series base unit. Use an RQ extension base unit (RQ65B, RQ68B, or RQ6

You can display the setting window from a module configuration diagram or system parameters. <Displaying the setting

You may have already placed a main base unit in the module configuration diagram. Scroll up or down in the module config

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-R Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC iQ-R Series ]

1-10 of Total 45

prev 1 / 5page next

Processing time of when multiple programs are executed with a MELSEC iQ-R series CPU module

When multiple programs are executed, the processing time (program switching time) becomes "Number of program files × 0.9 [us]". More Details >>
- No：22491
- Release Date：2018/09/03 17:28
- Update：2018/09/20 09:49
I/O numbers of a MELSEC iQ-R series I/O combined module (RH42C4NT2P)

An input and output use a single I/O number. (This is the same as QH42P.) When you replace a module that uses serial I/O numbers (e.g. QX41Y41P) with this m... More Details >>
- No：22471
- Release Date：2018/09/03 17:28
- Update：2018/09/19 13:57
Inter-module synchronization function of MELSEC iQ-R series

The inter-module synchronization function synchronizes the timing to control signals of multiple modules. This function synchronizes the input or output tim... More Details >>
- No：22497
- Release Date：2018/09/03 17:28
- Update：2018/09/20 11:21
Interrupt period setting of fixed scan interrupts of MELSEC iQ-R series

You can configure the setting in "Interrupt Setting from Internal Timer" of the CPU parameter. <Interrupt period setting> [Navigation Window]-> ... More Details >>
- No：22490
- Release Date：2018/09/03 17:28
- Update：2018/09/20 09:46
Accessories of the MELSEC iQ-R series 40-pin connector type module

No connector is provided with the module. Separately prepare any of the following connectors. A6CON1: Soldering type 32-point connector (40-pin connector) A6... More Details >>
- No：22467
- Release Date：2018/09/03 17:28
Setting the MELSEC iQ-R series inter-module synchronization function

Set modules in a module configuration diagram with GX Works3 and configure the inter-module synchronization setting. [Navigation Window]-> [Parameter]-... More Details >>
- No：22492
- Release Date：2018/09/03 17:28
- Update：2018/09/20 10:01
Using Q series terminal blocks and connectors with MELSEC iQ-R series modules

You can use a Q series 18-point screw terminal block with a MELSEC iQ-R series terminal block type I/O module or analog module. For a 40-pin connector type ... More Details >>
- No：22474
- Release Date：2018/09/03 17:28
- Update：2018/09/19 14:37
Mounting Q series modules on a MELSEC iQ-R series base unit

You cannot mount Q series modules on a MELSEC iQ-R series base unit. Use an RQ extension base unit (RQ65B, RQ68B, or RQ612B). You cannot mount some modules... More Details >>
- No：22466
- Release Date：2018/09/03 17:28
- Update：2018/09/19 11:58
How to display the parameter setting window for a programmable controller with GX Works3

You can display the setting window from a module configuration diagram or system parameters. <Displaying the setting window from a module configuration... More Details >>
- No：22498
- Release Date：2018/09/03 17:28
- Update：2018/09/20 12:10
I cannot place a main base unit in a module configuration diagram with GX Works3.

You may have already placed a main base unit in the module configuration diagram. Scroll up or down in the module configuration diagram and check if a main ... More Details >>
- No：22487
- Release Date：2018/09/03 17:28
- Update：2018/09/20 09:37

1-10 of Total 45

Inquiries

page top