The control response parameter can set the response to the target value (SV) of PID control as either "normal" or "fast"

It can't be configured. In the module configuration diagram of GX Works3, the configurations that can be created are tho

From the GX Works3 settings when the optional battery is installed, it must be set to Installed in the Optional Batter

It can be changed. It is now possible to write to the address (user unit, pulse unit) by the DHCMOV command. However, wr

FX5U/FX5UC/FX5S CPU modules are supported. Up to 2 axes are available in GX Works3 parameter settings. In addition, up t

The CPU module logging feature is accessed from the CPU module logging configuration tool. If the tool is installed, lau

Use the string comparison instructions LD$□, AND$□, OR$□. □contains =, <>, >, < =, <, > =.

From GXWorks3, use [Online] -[CPU Memory Operation] to initialize. How to check the IP address is as follows. They are s

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versio

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

51-60 of Total 266

prev 6 / 27page next

Regarding Control response parameter of built-in PID Control of CPU Module

The control response parameter can set the response to the target value (SV) of PID control as either "normal" or "fast". The difference is as follows. (1)W... More Details >>
- No：44653
- Release Date：2025/03/18 10:23
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding GX Works3 Module configuration diagram

It can't be configured. In the module configuration diagram of GX Works3, the configurations that can be created are those excluding FX5-CNV-IFC and FX3 Int... More Details >>
- No：39331
- Release Date：2023/02/14 09:08
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding settings when the battery is installed

From the GX Works3 settings when the optional battery is installed, it must be set to Installed in the Optional Battery Settings. Use the following proc... More Details >>
- No：44363
- Release Date：2024/03/27 17:09
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding changing the current address (user unit, pulse unit)

It can be changed. It is now possible to write to the address (user unit, pulse unit) by the DHCMOV command. However, writing is disabled during positioning... More Details >>
- No：39356
- Release Date：2023/02/15 13:03
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
Regarding CW/CCW(Forward pulse/Reverse pulse) output of the built-in positioning function

FX5U/FX5UC/FX5S CPU modules are supported. Up to 2 axes are available in GX Works3 parameter settings. In addition, up to 8 axes can be added by adding a hi... More Details >>
- No：22306
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:48
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
Regarding configuring of Data Logging

The CPU module logging feature is accessed from the CPU module logging configuration tool. If the tool is installed, launch it from GX Works3 Tools > Logg... More Details >>
- No：44613
- Release Date：2024/11/28 16:12
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding comparison of Strings

Use the string comparison instructions LD$□, AND$□, OR$□. □contains =, <>, >, < =, <, > =. More Details >>
- No：39355
- Release Date：2023/02/15 13:03
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding initialization procedure

From GXWorks3, use [Online] -[CPU Memory Operation] to initialize. How to check the IP address is as follows. They are stored in special registers SD8492 a... More Details >>
- No：45481
- Release Date：2025/11/12 13:54
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding number of CH of CPU Module built-in Heating/Cooling PID control

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versions are required in order to use it. ... More Details >>
- No：44651
- Release Date：2025/03/18 10:22
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding Data Register Byte Splitting

Use the WTOB instruction. More Details >>
- No：40022
- Release Date：2023/08/24 14:32
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software

51-60 of Total 266

Inquiries

page top