Set "(Last five digits of actual device number) - 1" for the Target MODBUS(R) device head number.Example) For the holdin

- Network No. is a number assigned to identify each network when multiple networks are configured. Each network No.

This problem can be workarounded by upgrading software products made by other companies to the latest version or uninsta

From version 1.64S, GX Works2 can import/export device comments in CSV format but does not support the function for para

Products earlier than version 8.58L do not support a project in which the following parameters are set. All the paramete

GX Developer does not need deleting when GX Works2 is installed.

Modules do not need setting in GX Works2 if not selectable from "Module Selection" in the "New Module" window for intell

When an ACPU module is replaced with a QCPU module, programs for the ACPU module can be used by changing the PLC type in

You need to set the number of extension base units with the connector for setting the number of extension base units.For

The difference is I/O numbers used for input and output (XY). QH42P uses the same I/O numbers both for input and output.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-Q Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-Q Series ]

11-20 of Total 213

prev 2 / 22page next

Setting of "Target MODBUS(R) device head number"

Set "(Last five digits of actual device number) - 1" for the Target MODBUS(R) device head number.Example) For the holding register 400018, set "17". More Details >>
- No：22682
- Release Date：2018/09/03 17:29
Network No., Group No., and Station No. in Network Parameter

- Network No. is a number assigned to identify each network when multiple networks are configured. Each network No. must be unique. - Group No. is a num... More Details >>
- No：22550
- Release Date：2018/09/03 17:28
- Update：2018/09/20 15:48
Error in simulation in GX Works2

This problem can be workarounded by upgrading software products made by other companies to the latest version or uninstalling them.For more details, refer to... More Details >>
- No：22570
- Release Date：2018/09/03 17:29
CSV format import/export capability of GX Works2

From version 1.64S, GX Works2 can import/export device comments in CSV format but does not support the function for parameters equivalent to that of GX Conve... More Details >>
- No：22643
- Release Date：2018/09/03 17:29
Opening a project in an old version of GX Developer

Products earlier than version 8.58L do not support a project in which the following parameters are set. All the parameters are set to their default values be... More Details >>
- No：22666
- Release Date：2018/09/03 17:29
- Update：2018/09/21 13:53
Deleting GX Developer when installing GX Works2

GX Developer does not need deleting when GX Works2 is installed. More Details >>
- No：22670
- Release Date：2018/09/03 17:29
Intelligent function module settings in GX Works2

Modules do not need setting in GX Works2 if not selectable from "Module Selection" in the "New Module" window for intelligent function module settings. More Details >>
- No：22685
- Release Date：2018/09/03 17:29
Compatibility between the A series modules and Q series modules

When an ACPU module is replaced with a QCPU module, programs for the ACPU module can be used by changing the PLC type in GX Developer. However, the programs ... More Details >>
- No：22696
- Release Date：2018/09/03 17:29
- Update：2018/09/21 14:21
Hardware setting for using Q series extension base units

You need to set the number of extension base units with the connector for setting the number of extension base units.For details, refer to the following.SH-0... More Details >>
- No：22721
- Release Date：2018/09/03 17:29
Difference between QH42P and QX41Y41P

The difference is I/O numbers used for input and output (XY). QH42P uses the same I/O numbers both for input and output. QX41Y41P uses sequential I/O numbers... More Details >>
- No：22539
- Release Date：2018/09/03 17:28

11-20 of Total 213

Inquiries

page top