The data in the special registers SD62 to SD79 change with the following process. - Turn ON the registers with OUT and

The error code "2110" is "SP.UNIT ERROR.". This error may be caused by one of the following factors. (1) The module tha

The error code "2100" is "SP.UNIT LAY ERR.". This error may be caused by one of the following factors. (1) In the I/O

GX Developer Version 8.98C or later supports 64-bit Windows 7. To install GX Developer to a Windows 7-based personal com

File registers "R" use the block switching method. The number of file register points used are divided and specified in

It cannot be increased by installing an SRAM card. The size of executable program depends on the program memory size of

The error code "2200" is "MISSING PARA.". The cause of the error is that a parameter file does not exist in all drives w

The USB driver is not installed.The driver needs to be separately installed before the first connection to a CPU module.

The error code "4100" is "OPERATION ERROR". The error occurs when a number is divided by 0 (Divisor D6268 value is 0). M

RS-232 is selected as PC side I/F in Transfer Setup of GX Developer or GX Works2.Change the setting in PC side I/F to US

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-Q Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-Q Series ]

201-210 of Total 213

prev 21 / 22page next

Turning ON/OFF annunciators (F)

The data in the special registers SD62 to SD79 change with the following process. - Turn ON the registers with OUT and SET instructions. - Turn OFF the r... More Details >>
- No：22649
- Release Date：2018/09/03 17:29
- Update：2018/09/21 11:45
Error code "2110" in QCPU

The error code "2110" is "SP.UNIT ERROR.". This error may be caused by one of the following factors. (1) The module that has been specified by a FROM/TO i... More Details >>
- No：22662
- Release Date：2018/09/03 17:29
- Update：2018/09/21 13:48
Error code "2100" in QCPU

The error code "2100" is "SP.UNIT LAY ERR.". This error may be caused by one of the following factors. (1) In the I/O assignment setting of the PLC parame... More Details >>
- No：22650
- Release Date：2018/09/03 17:29
- Update：2018/09/21 11:47
GX Developer's compatibility with 64-bit Windows 7

GX Developer Version 8.98C or later supports 64-bit Windows 7. To install GX Developer to a Windows 7-based personal computer, refer to the following techni... More Details >>
- No：22501
- Release Date：2018/09/03 17:28
- Update：2018/09/20 12:19
Difference between R and ZR

File registers "R" use the block switching method. The number of file register points used are divided and specified in units of 32k points. When multiple ... More Details >>
- No：22512
- Release Date：2018/09/03 17:28
- Update：2018/09/20 13:29
Insufficient memory capacity for sequence programs

It cannot be increased by installing an SRAM card. The size of executable program depends on the program memory size of the CPU. Use another CPU of which p... More Details >>
- No：22578
- Release Date：2018/09/03 17:29
- Update：2018/09/20 17:09
Error code "2200" in the universal model QCPU

The error code "2200" is "MISSING PARA.". The cause of the error is that a parameter file does not exist in all drives where parameters will be valid.As a re... More Details >>
- No：22614
- Release Date：2018/09/03 17:29
GX Works2's USB driver installation procedure

The USB driver is not installed.The driver needs to be separately installed before the first connection to a CPU module. More Details >>
- No：22507
- Release Date：2018/09/03 17:28
Error code "4100" in QCPU

The error code "4100" is "OPERATION ERROR". The error occurs when a number is divided by 0 (Divisor D6268 value is 0). Make modifications so that the divis... More Details >>
- No：22533
- Release Date：2018/09/03 17:28
- Update：2018/09/20 14:43
When the message "An unusable COM port was specified" is displayed

RS-232 is selected as PC side I/F in Transfer Setup of GX Developer or GX Works2.Change the setting in PC side I/F to USB. More Details >>
- No：22517
- Release Date：2018/09/03 17:28

201-210 of Total 213

Inquiries

page top