MX Component Version 3.15R or later supports 64-bit Windows 7.

This problem can be workarounded by upgrading software products made by other companies to the latest version or uninsta

The simulation function utilizes the standard TCP/IP communication provided by Microsoft Corporation. A communication c

Select [Target Memory] -> [Standard ROM] in the Read from PLC window.

No. You cannot use an SRAM card, ATA card, or Flash card. Specify an SD memory card as the transfer source (boot source)

Hardware specifications are different. For hardware specifications, refer to the following manuals. - MELSEC-Q C Contr

Set as follows in the Transfer Setup window. - Select "USB" for "PC side I/F". - Select "CPU Module" for "PLC side

The constant scan initial value in the simulation function is 100ms. Thus, the value of SM410(0.1sec. clock) is OFF in e

Copy the COMMENT into the MAIN of comments by program before changing the PLC type.The basic model QCPU cannot deal with

Accessible numbers of devices in one message are shown below.- 2000 coils and inputs for reading- 125 input registers an

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-Q Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-Q Series ]

51-60 of Total 213

prev 6 / 22page next

MX Component Version 3's compatibility with 64-bit Windows 7

MX Component Version 3.15R or later supports 64-bit Windows 7. More Details >>
- No：22520
- Release Date：2018/09/03 17:28
Error in simulation in GX Works2

This problem can be workarounded by upgrading software products made by other companies to the latest version or uninstalling them.For more details, refer to... More Details >>
- No：22570
- Release Date：2018/09/03 17:29
Simulation function not started

The simulation function utilizes the standard TCP/IP communication provided by Microsoft Corporation. A communication capability of software of another make... More Details >>
- No：22631
- Release Date：2018/09/03 17:29
- Update：2018/09/21 10:45
How to read comments in the standard ROM with GX Works2

Select [Target Memory] -> [Standard ROM] in the Read from PLC window. More Details >>
- No：22673
- Release Date：2018/09/03 17:29
- Update：2018/09/21 14:05
Boot file setting of the QnUDVCPU

No. You cannot use an SRAM card, ATA card, or Flash card. Specify an SD memory card as the transfer source (boot source). More Details >>
- No：22714
- Release Date：2018/09/03 17:29
Difference between Q24DHCCPU-V and Q12DCCPU-V

Hardware specifications are different. For hardware specifications, refer to the following manuals. - MELSEC-Q C Controller Module User's Manual - C Contro... More Details >>
- No：22629
- Release Date：2018/09/03 17:29
- Update：2018/09/21 10:41
Making transparent connections using GX Developer

Set as follows in the Transfer Setup window. - Select "USB" for "PC side I/F". - Select "CPU Module" for "PLC side I/F" and check "via GOT (direct couple... More Details >>
- No：22640
- Release Date：2018/09/03 17:29
- Update：2018/09/21 11:39
Behavior of special relay in simulation

The constant scan initial value in the simulation function is 100ms. Thus, the value of SM410(0.1sec. clock) is OFF in each scan. To turn ON/OFF SM410, set ... More Details >>
- No：22521
- Release Date：2018/09/03 17:28
- Update：2018/09/20 14:23
COMMENT to disappear after a PLC type change

Copy the COMMENT into the MAIN of comments by program before changing the PLC type.The basic model QCPU cannot deal with common comments. More Details >>
- No：22625
- Release Date：2018/09/03 17:29
Numbers of devices the automatic communication parameter of the MODBUS(R) interface module accept for writing and reading

Accessible numbers of devices in one message are shown below.- 2000 coils and inputs for reading- 125 input registers and holding registers for reading- 1968... More Details >>
- No：22668
- Release Date：2018/09/03 17:29

51-60 of Total 213

Inquiries

page top