Input derating is the percentage of simultaneous ON points, one of the specifications applied when input modules are use

The values are updated at the timing described below.- Current feed value: 1.8 ms- Machine feed value: 56.8 ms

Changing to the monitor write mode automatically changes the online change setting in Options to "Write during RUN (whil

The constant scan initial value in the simulation function is 100ms. Thus, the value of SM410(0.1sec. clock) is OFF in e

GX Works2 is programmable controller engineering software integrating programming and simulation of programmable control

It means that in an ambient temperature of 25 degrees Celsius, an error per day falls within the range of "delay of 2.57

Set a value in the special register SD414.Use a MOV instruction to set the value in SD414.

The scan time may be substantially longer. Continue the operation if there is no problem with the longer scan time.

The merits are as follows. (1) Downsized device The volume ratio is 1 to 10 in comparison with the VME card rack

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-Q Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-Q Series ]

61-70 of Total 213

prev 7 / 22page next

Input derating

Input derating is the percentage of simultaneous ON points, one of the specifications applied when input modules are used. When QX42 is used in a temperatur... More Details >>
- No：22692
- Release Date：2018/09/03 17:29
- Update：2018/10/03 16:23
Update timing of QD75 current feed value and machine feed value

The values are updated at the timing described below.- Current feed value: 1.8 ms- Machine feed value: 56.8 ms More Details >>
- No：22689
- Release Date：2018/09/03 17:29
Returning to the overwrite mode in GX Developer

Press the INSERT key. More Details >>
- No：22599
- Release Date：2018/09/03 17:29
Online change setting

Changing to the monitor write mode automatically changes the online change setting in Options to "Write during RUN (while PLC is running)".With returning to ... More Details >>
- No：22541
- Release Date：2018/09/03 17:28
Behavior of special relay in simulation

The constant scan initial value in the simulation function is 100ms. Thus, the value of SM410(0.1sec. clock) is OFF in each scan. To turn ON/OFF SM410, set ... More Details >>
- No：22521
- Release Date：2018/09/03 17:28
- Update：2018/09/20 14:23
Difference between GX Works2 and GX Works

GX Works2 is programmable controller engineering software integrating programming and simulation of programmable controller and setting monitor tool functio... More Details >>
- No：22505
- Release Date：2018/09/03 17:28
- Update：2018/09/20 13:16
Clock function accuracy

It means that in an ambient temperature of 25 degrees Celsius, an error per day falls within the range of "delay of 2.57s" to "advance of 5.27s". "TYP.+2.22... More Details >>
- No：22651
- Release Date：2018/09/03 17:29
- Update：2018/09/26 16:53
How to set a value in SM414(2n second clock)

Set a value in the special register SD414.Use a MOV instruction to set the value in SD414. More Details >>
- No：22639
- Release Date：2018/09/03 17:29
Memory allocation for online change

The scan time may be substantially longer. Continue the operation if there is no problem with the longer scan time. More Details >>
- No：22575
- Release Date：2018/09/03 17:29
- Update：2018/09/20 17:01
Replacing personal computers with C Controller modules

The merits are as follows. (1) Downsized device The volume ratio is 1 to 10 in comparison with the VME card rack (6U) type. (2) Long-term stable supply... More Details >>
- No：22706
- Release Date：2018/09/03 17:29
- Update：2018/09/21 14:33

61-70 of Total 213

Inquiries

page top