GX Works2 Version 1.62Q or later supports Windows 7.

Keep SM722 ON or correct the program so that any one of the ten numbers 0 to 9 is stored in each digit of the source dat

GX Works2 Version 1.45X or later supports a print range specifying capability.Set "Start Step" and "End Step" for "Speci

The corresponding operation depends on the counter type selected. (1) If "Linear Counter" is selected If the p

(1) If the A/D conversion enable signal is kept ON, conversion processing is kept performed. Once conversion proce

The boot operation from the standard ROM is not possible.The program memory of universal model QCPU is a flash ROM.Thus,

No.It is necessary to configure one port to use the MELSOFT connection.

Click the local label to be checked and select "Cross Reference" from the right-click menu to check the devices.

Set as follows in the Transfer Setup window. - Select "USB" for "PC side I/F". - Select "GOT" for "PLC side I/F" and

If a direct connection is made, either type can be used.If making a connection via a hub, use a straight cable.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-Q Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-Q Series ]

1-10 of Total 213

prev 1 / 22page next

Compatibility with 64-bit Windows 7

GX Works2 Version 1.62Q or later supports Windows 7. More Details >>
- No：22554
- Release Date：2018/09/03 17:28
Operation error at the execution of a BIN instruction

Keep SM722 ON or correct the program so that any one of the ten numbers 0 to 9 is stored in each digit of the source data.An operation error occurs when data... More Details >>
- No：22635
- Release Date：2018/09/03 17:29
Specifying steps in printing data displayed in the window in GX Works2

GX Works2 Version 1.45X or later supports a print range specifying capability.Set "Start Step" and "End Step" for "Specified Print Range" in the Print window. More Details >>
- No：22695
- Release Date：2018/09/03 17:29
Counting operation of QD62

The corresponding operation depends on the counter type selected. (1) If "Linear Counter" is selected If the present counter value exceeds the upper limi... More Details >>
- No：22624
- Release Date：2018/09/03 17:29
- Update：2018/09/21 10:32
Change timing of the status of A/D conversion module's I/O signals

(1)If the A/D conversion enable signal is kept ON, conversion processing is kept performed. Once conversion processing is successfully performed, A/D conve... More Details >>
- No：22710
- Release Date：2018/09/03 17:29
- Update：2018/09/21 15:12
Boot operation from the standard ROM

The boot operation from the standard ROM is not possible.The program memory of universal model QCPU is a flash ROM.Thus, writing in the program memory achiev... More Details >>
- No：22553
- Release Date：2018/09/03 17:28
Open setting of the built-in Ethernet port QCPU

No.It is necessary to configure one port to use the MELSOFT connection. More Details >>
- No：22648
- Release Date：2018/09/03 17:29
How to check automatically assigned devices in GX Works2

Click the local label to be checked and select "Cross Reference" from the right-click menu to check the devices. More Details >>
- No：22700
- Release Date：2018/09/03 17:29
Transparent function

Set as follows in the Transfer Setup window. - Select "USB" for "PC side I/F". - Select "GOT" for "PLC side I/F" and select "via GOT (direct coupled) tra... More Details >>
- No：22598
- Release Date：2018/09/03 17:29
- Update：2018/09/20 17:55
Cables connected to the Ethernet port on the universal model QCPU

If a direct connection is made, either type can be used.If making a connection via a hub, use a straight cable. More Details >>
- No：22690
- Release Date：2018/09/03 17:29

1-10 of Total 213

Inquiries

page top