They can be used simultaneously when I/O signals are not overlapped. The overlap of signals are checked automatically wh

The error code "2100" is "SP.UNIT LAY ERR.". This error may be caused by one of the following factors. (1) An intelli

The values are updated at the timing described below. - Current feed value: 0.9 ms - Machine feed value: 0.9 ms

Set the PWM output-on-width and the PWM output cycle, and then execute a dedicated instruction "ICPWM instruction".

Up to 40 modules. When the branch module and extension module are used, use L26CPU-(P)BT CPU modules whose first 5 digit

At least one L series CPU is necessary when using the simple PLC communication function.

Refer to the following manual. MELSEC-L CPU Module User's Manual (Function Explanation, Program Fundamentals) Appendix 1

When the protocol is set to TCP, KeepAlive check is performed. (Checking for a response to KeepAlive ACK message) An ali

Up to 10 modules are connectable. Note that RS-232 adapter and END cover are excluded. Use the built-in CC-Link functio

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

1-10 of Total 105

prev 1 / 11page next

CPU built-in I/O function

They can be used simultaneously when I/O signals are not overlapped. The overlap of signals are checked automatically when a user select functions in the bui... More Details >>
- No：22816
- Release Date：2018/09/03 17:30
Error code "2100" in LCPU

The error code "2100" is "SP.UNIT LAY ERR.". This error may be caused by one of the following factors. (1) An intelligent function module is assigned as a... More Details >>
- No：22725
- Release Date：2018/09/03 17:29
- Update：2018/09/21 17:02
Update timing of LD75 current feed value and machine feed value

The values are updated at the timing described below. - Current feed value: 0.9 ms - Machine feed value: 0.9 ms More Details >>
- No：22748
- Release Date：2018/09/03 17:29
How to use PWM output of LCPU built-in I/O

Set the PWM output-on-width and the PWM output cycle, and then execute a dedicated instruction "ICPWM instruction". More Details >>
- No：22757
- Release Date：2018/09/03 17:30
Maximum number of modules to be connected to L26CPU-(P)BT

Up to 40 modules. When the branch module and extension module are used, use L26CPU-(P)BT CPU modules whose first 5 digits of the serial number are "13072" or... More Details >>
- No：22813
- Release Date：2018/09/03 17:30
Configuration of simple PLC communication function using LCPU

At least one L series CPU is necessary when using the simple PLC communication function. More Details >>
- No：22747
- Release Date：2018/09/03 17:29
LCPU parameter number check

Refer to the following manual. MELSEC-L CPU Module User's Manual (Function Explanation, Program Fundamentals) Appendix 1 More Details >>
- No：22798
- Release Date：2018/09/03 17:30
Usage of UPS (uninterruptible power supply)

No, it cannot be used. More Details >>
- No：22831
- Release Date：2018/09/03 17:30
Alive check for built-in Ethernet port LCPU

When the protocol is set to TCP, KeepAlive check is performed. (Checking for a response to KeepAlive ACK message) An alive check message is sent five seconds... More Details >>
- No：22782
- Release Date：2018/09/03 17:30
Number of connectable modules

Up to 10 modules are connectable. Note that RS-232 adapter and END cover are excluded. Use the built-in CC-Link function for I/O enhancement. More Details >>
- No：22802
- Release Date：2018/09/03 17:30

1-10 of Total 105

Inquiries

page top