Refer to the following manual. MELSEC-L CPU Module User's Manual (Function Explanation, Program Fundamentals) Appendix 1

Use the automatic backup setting. While "1: enabled" is set in the CH[] automatic backup setting after auto tuning of PI

The conversion speed is as follows. - High speed: 20 microseconds per channel- Medium speed: 80 microseconds per channel

The heater disconnection detection function monitors the heater current on the transistor output. If no current flows w

It can be executed for the same connection number. When data exist in the socket communication receive data area and the

The values are updated at the timing described below. - Current feed value: 0.9 ms - Machine feed value: 0.9 ms

The following settings are required for the "Open Setting" for the number of connected external devices.- Protocol: "UDP

The extension module is used to configure the extension block when 10 modules or more are mounted to LCPU. Connect the b

The boot operation from the standard ROM is not possible. The program memory of LCPU is a flash ROM. Thus, writing in th

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

91-100 of Total 105

prev 10 / 11page next

LCPU parameter number check

Refer to the following manual. MELSEC-L CPU Module User's Manual (Function Explanation, Program Fundamentals) Appendix 1 More Details >>
- No：22798
- Release Date：2018/09/03 17:30
Retention of auto tuning setting value for temperature control module

Use the automatic backup setting. While "1: enabled" is set in the CH[] automatic backup setting after auto tuning of PID constants in the buffer memory (Un\... More Details >>
- No：22795
- Release Date：2018/09/03 17:30
Conversion speed of L60AD4

The conversion speed is as follows. - High speed: 20 microseconds per channel- Medium speed: 80 microseconds per channel- Low speed: 1 millisecond per channel More Details >>
- No：22776
- Release Date：2018/09/03 17:30
Loop disconnection detection function and heater disconnection detection function of temperature control module

The heater disconnection detection function monitors the heater current on the transistor output. If no current flows when the transistor is ON, it is consi... More Details >>
- No：22773
- Release Date：2018/09/03 17:30
- Update：2018/09/22 10:58
Execution of the SOCRMODE instruction in the same connection during socket communication of LCPU

It can be executed for the same connection number. When data exist in the socket communication receive data area and the SOCRMODE instruction is executed, va... More Details >>
- No：22771
- Release Date：2018/09/03 17:30
Update timing of LD75 current feed value and machine feed value

The values are updated at the timing described below. - Current feed value: 0.9 ms - Machine feed value: 0.9 ms More Details >>
- No：22748
- Release Date：2018/09/03 17:29
LCPU built-in Ethernet port setting when using the simple PLC communication function

The following settings are required for the "Open Setting" for the number of connected external devices.- Protocol: "UDP"- Open System: "MELSOFT connection" More Details >>
- No：22739
- Release Date：2018/09/03 17:29
How to use L series extension modules

The extension module is used to configure the extension block when 10 modules or more are mounted to LCPU. Connect the branch module and the extension module... More Details >>
- No：22738
- Release Date：2018/09/03 17:29
Boot operation from the standard ROM

The boot operation from the standard ROM is not possible. The program memory of LCPU is a flash ROM. Thus, writing in the program memory achieves a ROM opera... More Details >>
- No：22728
- Release Date：2018/09/03 17:29
File switching timing of L series logging function

No. More Details >>
- No：22809
- Release Date：2018/09/03 17:30

91-100 of Total 105

Inquiries

page top