Up to 40 modules. When the branch module and extension module are used, use L26CPU-(P)BT CPU modules whose first 5 digit

To prevent an LED from turning on when an error occurs, set 0 to the relevant factor number setting area (4 bits for eac

Set the PWM output-on-width and the PWM output cycle, and then execute a dedicated instruction "ICPWM instruction".

It is possible to remove L61P and use L63P.

The conversion speed is as follows. - High speed: 20 microseconds per channel- Medium speed: 80 microseconds per channel

The extension module is used to configure the extension block when 10 modules or more are mounted to LCPU. Connect the b

The following settings are required for the "Open Setting" for the number of connected external devices.- Protocol: "UDP

The KeepAlive setting for the built-in Ethernet port in the L series is fixed. The setting is unchangeable.

If comments cannot be stored in the program memory, write them in the standard ROM or a memory card. Calculate the memor

It is fixed to 32 points from 10 to 2F.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

91-100 of Total 105

prev 10 / 11page next

Maximum number of modules to be connected to L26CPU-(P)BT

Up to 40 modules. When the branch module and extension module are used, use L26CPU-(P)BT CPU modules whose first 5 digits of the serial number are "13072" or... More Details >>
- No：22813
- Release Date：2018/09/03 17:30
Method to prevent the BAT.LED from turning on

To prevent an LED from turning on when an error occurs, set 0 to the relevant factor number setting area (4 bits for each) in SD207 to SD209. To disable the ... More Details >>
- No：22754
- Release Date：2018/09/03 17:29
How to use PWM output of LCPU built-in I/O

Set the PWM output-on-width and the PWM output cycle, and then execute a dedicated instruction "ICPWM instruction". More Details >>
- No：22757
- Release Date：2018/09/03 17:30
L63P compatibility with L series CPU packages

It is possible to remove L61P and use L63P. More Details >>
- No：22742
- Release Date：2018/09/03 17:29
Conversion speed of L60AD4

The conversion speed is as follows. - High speed: 20 microseconds per channel- Medium speed: 80 microseconds per channel- Low speed: 1 millisecond per channel More Details >>
- No：22776
- Release Date：2018/09/03 17:30
How to use L series extension modules

The extension module is used to configure the extension block when 10 modules or more are mounted to LCPU. Connect the branch module and the extension module... More Details >>
- No：22738
- Release Date：2018/09/03 17:29
LCPU built-in Ethernet port setting when using the simple PLC communication function

The following settings are required for the "Open Setting" for the number of connected external devices.- Protocol: "UDP"- Open System: "MELSOFT connection" More Details >>
- No：22739
- Release Date：2018/09/03 17:29
KeepAlive setting for built-in Ethernet port in LCPU

The KeepAlive setting for the built-in Ethernet port in the L series is fixed. The setting is unchangeable. More Details >>
- No：22760
- Release Date：2018/09/03 17:30
PLC write not possible due to memory overload

If comments cannot be stored in the program memory, write them in the standard ROM or a memory card. Calculate the memory capacity in GX Works2 or GX Develop... More Details >>
- No：22767
- Release Date：2018/09/03 17:30
Number of points used for I/O assignment of L26CPU-(P)BT built-in CC-Link function

It is fixed to 32 points from 10 to 2F. More Details >>
- No：22777
- Release Date：2018/09/03 17:30

91-100 of Total 105

Inquiries

page top