The heater disconnection detection function monitors the heater current on the transistor output. If no current flows w

Yes. They have the same pin layout.

To send simultaneous broadcast using UDP, set the parameters as follows.- Destination IP Address: FF.FF.FF.FFh - Destina

The positioning operation starts just in 30 microseconds, with a maximum high speed output of 200k pulses per second. S-

It is the number of data collected before and after a trigger occurrence.

Refer to the following manual. MELSEC-L CPU Module User's Manual (Function Explanation, Program Fundamentals) Appendix 1

Up to 1280 points. (128 points per setting, and up to 10 data logging settings)

- Ambient temperature: 25+/-5 degrees Celsius with tolerance of +/-0.1% - Ambient temperature: 0 to 55 degrees Celsius

Up to 40 modules. When the branch module and extension module are used, use L26CPU-(P)BT CPU modules whose first 5 digit

Use an END cover applicable to the following. - The L6EC whose serial number (first six digits) is "*****2" or later- EN

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

11-20 of Total 105

prev 2 / 11page next

Loop disconnection detection function and heater disconnection detection function of temperature control module

The heater disconnection detection function monitors the heater current on the transistor output. If no current flows when the transistor is ON, it is consi... More Details >>
- No：22773
- Release Date：2018/09/03 17:30
- Update：2018/09/22 10:58
FNC connector pin layout in L series I/O module and Q series I/O module

Yes. They have the same pin layout. More Details >>
- No：22774
- Release Date：2018/09/03 17:30
Simultaneous broadcast transmission setting for built-in Ethernet port LCPU

To send simultaneous broadcast using UDP, set the parameters as follows.- Destination IP Address: FF.FF.FF.FFh - Destination Port Number: Other than FFFFh (S... More Details >>
- No：22785
- Release Date：2018/09/03 17:30
Built-in positioning function of LCPU

The positioning operation starts just in 30 microseconds, with a maximum high speed output of 200k pulses per second. S-curve acceleration/deceleration is al... More Details >>
- No：22790
- Release Date：2018/09/03 17:30
Number of records in LCPU logging function

It is the number of data collected before and after a trigger occurrence. More Details >>
- No：22794
- Release Date：2018/09/03 17:30
LCPU parameter number check

Refer to the following manual. MELSEC-L CPU Module User's Manual (Function Explanation, Program Fundamentals) Appendix 1 More Details >>
- No：22798
- Release Date：2018/09/03 17:30
Number of data sampling points in LCPU logging function

Up to 1280 points. (128 points per setting, and up to 10 data logging settings) More Details >>
- No：22805
- Release Date：2018/09/03 17:30
L60AD4 accuracy

- Ambient temperature: 25+/-5degrees Celsius with tolerance of +/-0.1% - Ambient temperature: 0 to 55degrees Celsius with tolerance of +/-0.2% (Accuracy f... More Details >>
- No：22811
- Release Date：2018/09/03 17:30
- Update：2018/09/26 16:46
Maximum number of modules to be connected to L26CPU-(P)BT

Up to 40 modules. When the branch module and extension module are used, use L26CPU-(P)BT CPU modules whose first 5 digits of the serial number are "13072" or... More Details >>
- No：22813
- Release Date：2018/09/03 17:30
Use of END cover with the branch module and extension module

Use an END cover applicable to the following. - The L6EC whose serial number (first six digits) is "*****2" or later- END cover with ERR terminal (optional i... More Details >>
- No：22815
- Release Date：2018/09/03 17:30

11-20 of Total 105

Inquiries

page top