SNTP communication error in built-in ...

The error does not affect the CPU time. The CPU time is not set when a communication error occurs. More Details >>

Compliance with SEMI-F47 for L series...

Use the following power supply module with an input power of 200 VAC for compliance with SEMI-F47. - Power supply module: L61PWith an input power of 100 VAC,... More Details >>

PLC write not possible due to memory ...

If comments cannot be stored in the program memory, write them in the standard ROM or a memory card. Calculate the memory capacity in GX Works2 or GX Develop... More Details >>

Open setting of LCPU

No. It is necessary to configure one port to use the MELSOFT connection. More Details >>

Storing the data logging setting to a...

In the write logging setting, choose [Online] and [Write Logging Setting], and set the target memory to SD memory card. More Details >>

LCPU built-in Ethernet port setting w...

The following settings are required for the "Open Setting" for the number of connected external devices.- Protocol: "UDP"- Open System: "MELSOFT connection" More Details >>

Logging data storage in a USB memory

GX LogViewer function of Mitsubishi GOT (GT16) extracts the logging data to a USB memory attached to the USB interface on the front of the GOT. More Details >>

Usage of UPS (uninterruptible power s...

No, it cannot be used. More Details >>

Continuous logging

Yes. As a guide, the processing time is shown below.For the logging condition, refer to figure 1 below. - For 16 devices: 2 ms - For 64 devices: 6 ms More Details >>

CPU operation when the time setting f...

When an error occurs, the operation can be stopped or continued according to the "At Error Occurrence" setting.(The default is "Continue".) More Details >>