The LCPU connector terminals can be used as terminals for built-in I/O function. The setting of the built-in I/O functio

In LCPU, file register capacity depends on CPU. The number of file register points cannot be increased. (A file register

An error occurs and CPU will stop. Install the END cover and reset the CPU module.

- Ambient temperature: 25+/-5 degrees Celsius with tolerance of +/-0.1% - Ambient temperature: 0 to 55 degrees Celsius w

X00 to X0F and Y00 to Y07 are sorted for each function. For more details, refer to "MELSEC-L CPU Module User's Manual (B

In the write logging setting, choose [Online] and [Write Logging Setting], and set the target memory to SD memory card.

A connector is not included. The connector is obtained by user. A6CON1 (soldering connector, straight out type), A6CON2

The bits 0 to F of the special register SD1286 (Receive state signal) correspond to the connection numbers 1 to 16. When

The values are updated at the timing described below. - Current feed value: 0.9 ms - Machine feed value: 0.9 ms

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

21-30 of Total 105

prev 3 / 11page next

How to use LCPU connector terminals

The LCPU connector terminals can be used as terminals for built-in I/O function. The setting of the built-in I/O function can be configured with the paramete... More Details >>
- No：22796
- Release Date：2018/09/03 17:30
How to increase file register capacity

In LCPU, file register capacity depends on CPU. The number of file register points cannot be increased. (A file register cannot be set on an SD memory card.)... More Details >>
- No：22766
- Release Date：2018/09/03 17:30
END cover

An error occurs and CPU will stop. Install the END cover and reset the CPU module. More Details >>
- No：22817
- Release Date：2018/09/03 17:30
L60DA4 accuracy

- Ambient temperature: 25+/-5degrees Celsius with tolerance of +/-0.1% - Ambient temperature: 0 to 55degrees Celsius with tolerance of +/-0.3% (accuracy f... More Details >>
- No：22825
- Release Date：2018/09/03 17:30
- Update：2018/09/27 11:38
Number of points used for I/O assignment of LCPU built-in I/O function

X00 to X0F and Y00 to Y07 are sorted for each function. For more details, refer to "MELSEC-L CPU Module User's Manual (Built-In I/O Function)". More Details >>
- No：22762
- Release Date：2018/09/03 17:30
Usage of UPS (uninterruptible power supply)

No, it cannot be used. More Details >>
- No：22831
- Release Date：2018/09/03 17:30
Storing the data logging setting to an SD memory card in LCPU

In the write logging setting, choose [Online] and [Write Logging Setting], and set the target memory to SD memory card. More Details >>
- No：22758
- Release Date：2018/09/03 17:30
How to obtain connectors used for L series connector type I/O modules

A connector is not included. The connector is obtained by user. A6CON1 (soldering connector, straight out type), A6CON2 (crimp connector, straight out type),... More Details >>
- No：22791
- Release Date：2018/09/03 17:30
SD1286 of LCPU with built-in Ethernet port

The bits 0 to F of the special register SD1286 (Receive state signal) correspond to the connection numbers 1 to 16. When it receives data, the corresponding ... More Details >>
- No：22786
- Release Date：2018/09/03 17:30
Update timing of LD75 current feed value and machine feed value

The values are updated at the timing described below. - Current feed value: 0.9 ms - Machine feed value: 0.9 ms More Details >>
- No：22748
- Release Date：2018/09/03 17:29

21-30 of Total 105

Inquiries

page top