Check the following. - Whether the external device specifies the port number of the corresponding connection to the L s

In L02CPU(-P), the start I/O number of the additional module begins from 10H. In L26CPU-(P)BT, the number begins from 30

At least one L series CPU is necessary when using the simple PLC communication function.

A password can be set. - Use the file password 32 function.- Number of characters: 4 to 32 (alphanumeric and special cha

The auto logging function and backup function cannot be used simultaneously. The backup function must be used after the

Use an END cover applicable to the following. - The L6EC whose serial number (first six digits) is "*****2" or later- EN

The error code "2400" is "FILE SET ERROR". This error may be caused when the file specified with a parameter does not ex

Yes. As a guide, the processing time is shown below.For the logging condition, refer to figure 1 below. - For 16 devices

The L series CPU serial numbers with upper 5 digits of "14112" or later indicate compatibility with LJ71E71-100.

It can be executed for the same connection number. When data exist in the socket communication receive data area and the

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

41-50 of Total 105

prev 5 / 11page next

Causes to why SD1286 does not turn on during socket communication of LCPU

Check the following. - Whether the external device specifies the port number of the corresponding connection to the L series CPU. - In the TCP fixed-length... More Details >>
- No：22787
- Release Date：2018/09/03 17:30
- Update：2018/09/22 11:51
I/O assignment for additional modules connected to LCPU

In L02CPU(-P), the start I/O number of the additional module begins from 10H. In L26CPU-(P)BT, the number begins from 30H. More Details >>
- No：22808
- Release Date：2018/09/03 17:30
Configuration of simple PLC communication function using LCPU

At least one L series CPU is necessary when using the simple PLC communication function. More Details >>
- No：22747
- Release Date：2018/09/03 17:29
LCPU protection function

A password can be set. - Use the file password 32 function.- Number of characters: 4 to 32 (alphanumeric and special characters, case-sensitive)- Disabled op... More Details >>
- No：22810
- Release Date：2018/09/03 17:30
Simultaneous use of auto logging and backup functions

The auto logging function and backup function cannot be used simultaneously. The backup function must be used after the logging function is stopped. (A singl... More Details >>
- No：22819
- Release Date：2018/09/03 17:30
Use of END cover with the branch module and extension module

Use an END cover applicable to the following. - The L6EC whose serial number (first six digits) is "*****2" or later- END cover with ERR terminal (optional i... More Details >>
- No：22815
- Release Date：2018/09/03 17:30
Error code "2400" in LCPU

The error code "2400" is "FILE SET ERROR". This error may be caused when the file specified with a parameter does not exist. The individual information param... More Details >>
- No：22729
- Release Date：2018/09/03 17:29
Continuous logging

Yes. As a guide, the processing time is shown below.For the logging condition, refer to figure 1 below. - For 16 devices: 2 ms - For 64 devices: 6 ms More Details >>
- No：22829
- Release Date：2018/09/03 17:30
- Update：2018/09/22 15:33
Versions of LCPU compatible with LJ71E71-100

The L series CPU serial numbers with upper 5 digits of "14112" or later indicate compatibility with LJ71E71-100. More Details >>
- No：22770
- Release Date：2018/09/03 17:30
Execution of the SOCRMODE instruction in the same connection during socket communication of LCPU

It can be executed for the same connection number. When data exist in the socket communication receive data area and the SOCRMODE instruction is executed, va... More Details >>
- No：22771
- Release Date：2018/09/03 17:30

41-50 of Total 105

Inquiries

page top