The LCPU connector terminals can be used as terminals for built-in I/O function. The setting of the built-in I/O functio

The positioning operation starts just in 30 microseconds, with a maximum high speed output of 200k pulses per second. S-

It is fixed to 32 points from 10 to 2F.

NTP and SNTP are compatible. Therefore, an NTP server can be used for clock setting.

The built-in I/O functions are standard functions of the L series CPU. Combining these functions flexibly achieves vario

Up to 1280 points. (128 points per setting, and up to 10 data logging settings)

Use the automatic backup setting. While "1: enabled" is set in the CH[] automatic backup setting after auto tuning of PI

When the protocol is set to TCP, KeepAlive check is performed. (Checking for a response to KeepAlive ACK message) An ali

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

41-50 of Total 105

prev 5 / 11page next

File switching timing of L series logging function

No. More Details >>
- No：22809
- Release Date：2018/09/03 17:30
How to use LCPU connector terminals

The LCPU connector terminals can be used as terminals for built-in I/O function. The setting of the built-in I/O function can be configured with the paramete... More Details >>
- No：22796
- Release Date：2018/09/03 17:30
Built-in positioning function of LCPU

The positioning operation starts just in 30 microseconds, with a maximum high speed output of 200k pulses per second. S-curve acceleration/deceleration is al... More Details >>
- No：22790
- Release Date：2018/09/03 17:30
Number of points used for I/O assignment of L26CPU-(P)BT built-in CC-Link function

It is fixed to 32 points from 10 to 2F. More Details >>
- No：22777
- Release Date：2018/09/03 17:30
NTP support by the SNTP function of LCPU with built-in Ethernet port

NTP and SNTP are compatible. Therefore, an NTP server can be used for clock setting. More Details >>
- No：22744
- Release Date：2018/09/03 17:29
LCPU built-in I/O function

The built-in I/O functions are standard functions of the L series CPU. Combining these functions flexibly achieves various controls with lower cost, eliminat... More Details >>
- No：22806
- Release Date：2018/09/03 17:30
Number of data sampling points in LCPU logging function

Up to 1280 points. (128 points per setting, and up to 10 data logging settings) More Details >>
- No：22805
- Release Date：2018/09/03 17:30
RS-232 adapter cable disconnection prevention

Yes. More Details >>
- No：22799
- Release Date：2018/09/03 17:30
Retention of auto tuning setting value for temperature control module

Use the automatic backup setting. While "1: enabled" is set in the CH[] automatic backup setting after auto tuning of PID constants in the buffer memory (Un\... More Details >>
- No：22795
- Release Date：2018/09/03 17:30
Alive check for built-in Ethernet port LCPU

When the protocol is set to TCP, KeepAlive check is performed. (Checking for a response to KeepAlive ACK message) An alive check message is sent five seconds... More Details >>
- No：22782
- Release Date：2018/09/03 17:30

41-50 of Total 105

Inquiries

page top