- Ambient temperature: 25+/-5 degrees Celsius Full scale x (+/-0.3%) - Ambient temperature: 0 to 55 degrees Celsius Full

To send simultaneous broadcast using UDP, set the parameters as follows.- Destination IP Address: FF.FF.FF.FFh - Destina

Yes. As a guide, the processing time is shown below.For the logging condition, refer to figure 1 below. - For 16 devices

When an error occurs, the operation can be stopped or continued according to the "At Error Occurrence" setting.(The defa

At least one L series CPU is necessary when using the simple PLC communication function.

When the protocol is set to TCP, KeepAlive check is performed. (Checking for a response to KeepAlive ACK message) An ali

The following settings are required for the "Open Setting" for the number of connected external devices.- Protocol: "UDP

Yes. They have the same pin layout.

Refer to the following manual. MELSEC-L CPU Module User's Manual (Function Explanation, Program Fundamentals) Appendix 1

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

51-60 of Total 105

prev 6 / 11page next

L60TCRT4(BW) accuracy

- Ambient temperature: 25+/-5degrees Celsius Full scalex (+/-0.3%) - Ambient temperature: 0 to 55degrees Celsius Full scalex (+/-0.7%) More Details >>
- No：22823
- Release Date：2018/09/03 17:30
- Update：2018/09/27 11:35
Simultaneous broadcast transmission setting for built-in Ethernet port LCPU

To send simultaneous broadcast using UDP, set the parameters as follows.- Destination IP Address: FF.FF.FF.FFh - Destination Port Number: Other than FFFFh (S... More Details >>
- No：22785
- Release Date：2018/09/03 17:30
Continuous logging

Yes. As a guide, the processing time is shown below.For the logging condition, refer to figure 1 below. - For 16 devices: 2 ms - For 64 devices: 6 ms More Details >>
- No：22829
- Release Date：2018/09/03 17:30
- Update：2018/09/22 15:33
CPU operation when the time setting failed

When an error occurs, the operation can be stopped or continued according to the "At Error Occurrence" setting.(The default is "Continue".) More Details >>
- No：22828
- Release Date：2018/09/03 17:30
Configuration of simple PLC communication function using LCPU

At least one L series CPU is necessary when using the simple PLC communication function. More Details >>
- No：22747
- Release Date：2018/09/03 17:29
Alive check for built-in Ethernet port LCPU

When the protocol is set to TCP, KeepAlive check is performed. (Checking for a response to KeepAlive ACK message) An alive check message is sent five seconds... More Details >>
- No：22782
- Release Date：2018/09/03 17:30
Removal of SD memory card during logging in L series

An error will occur in CPU. More Details >>
- No：22812
- Release Date：2018/09/03 17:30
LCPU built-in Ethernet port setting when using the simple PLC communication function

The following settings are required for the "Open Setting" for the number of connected external devices.- Protocol: "UDP"- Open System: "MELSOFT connection" More Details >>
- No：22739
- Release Date：2018/09/03 17:29
FNC connector pin layout in L series I/O module and Q series I/O module

Yes. They have the same pin layout. More Details >>
- No：22774
- Release Date：2018/09/03 17:30
LCPU parameter number check

Refer to the following manual. MELSEC-L CPU Module User's Manual (Function Explanation, Program Fundamentals) Appendix 1 More Details >>
- No：22798
- Release Date：2018/09/03 17:30

51-60 of Total 105

Inquiries

page top