Step ladders are not available in LCPU. There is no alternative function.

Use the time setting function to synchronize the internal clock.

(1) When it happened no longer than the allowable momentary power failure time. The module records an error log a

The KeepAlive setting for the built-in Ethernet port in the L series is fixed. The setting is unchangeable.

After data is written to the program cache memory (SRAM), it is automatically transferred to the program memory (flash R

To receive simultaneous broadcast using UDP, set the parameters as follows. - Destination IP Address: FF.FF.FF.FFh - Des

The heater disconnection detection function monitors the heater current on the transistor output. If no current flows w

Yes. They have the same pin layout.

The minimum input response times are different. The minimum input response time is 100 microseconds for standard inputs,

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

61-70 of Total 105

prev 7 / 11page next

Availability of step ladders for FX in L series

Step ladders are not available in LCPU. There is no alternative function. More Details >>
- No：22752
- Release Date：2018/09/03 17:29
LCPU internal clock synchronization

Use the time setting function to synchronize the internal clock. More Details >>
- No：22755
- Release Date：2018/09/03 17:30
Behavior of sequence program in event of momentary power failure in LCPU

(1) When it happened no longer than the allowable momentary power failure time. The module records an error log and suspends the operation processing. Ho... More Details >>
- No：22756
- Release Date：2018/09/03 17:30
- Update：2018/09/22 10:43
KeepAlive setting for built-in Ethernet port in LCPU

The KeepAlive setting for the built-in Ethernet port in the L series is fixed. The setting is unchangeable. More Details >>
- No：22760
- Release Date：2018/09/03 17:30
Remedy to an error message when performing online change in LCPU

After data is written to the program cache memory (SRAM), it is automatically transferred to the program memory (flash ROM). Therefore, additional online cha... More Details >>
- No：22763
- Release Date：2018/09/03 17:30
- Update：2018/09/22 10:50
Simultaneous broadcast reception setting for built-in Ethernet port LCPU

To receive simultaneous broadcast using UDP, set the parameters as follows. - Destination IP Address: FF.FF.FF.FFh - Destination Port No.: Other than FFFFh (... More Details >>
- No：22772
- Release Date：2018/09/03 17:30
Loop disconnection detection function and heater disconnection detection function of temperature control module

The heater disconnection detection function monitors the heater current on the transistor output. If no current flows when the transistor is ON, it is consi... More Details >>
- No：22773
- Release Date：2018/09/03 17:30
- Update：2018/09/22 10:58
FNC connector pin layout in L series I/O module and Q series I/O module

Yes. They have the same pin layout. More Details >>
- No：22774
- Release Date：2018/09/03 17:30
RS-232 adapter cable disconnection prevention

Yes. More Details >>
- No：22799
- Release Date：2018/09/03 17:30
Difference between standard inputs A06 to B11 and high-speed inputs A12 to B20 of LCPU built-in I/O function

The minimum input response times are different. The minimum input response time is 100 microseconds for standard inputs, and 10 microseconds for high-speed i... More Details >>
- No：22804
- Release Date：2018/09/03 17:30

61-70 of Total 105

Inquiries

page top