To receive simultaneous broadcast using UDP, set the parameters as follows. - Destination IP Address: FF.FF.FF.FFh - Des

The conversion speed is as follows. - High speed: 20 microseconds per channel- Medium speed: 80 microseconds per channel

Yes. Note that SD memory cards are formatted at the factory. If an SD memory card needs to be reformatted, format it usi

Up to 10 modules are connectable. Note that RS-232 adapter and END cover are excluded. Use the built-in CC-Link functio

GX LogViewer function of Mitsubishi GOT (GT16) extracts the logging data to a USB memory attached to the USB interface o

At least one L series CPU is necessary when using the simple PLC communication function.

(1) The number of modules to be connected- Main block: up to 10 modules- Extension block: up to 11 modules(2) The number

Use an END cover applicable to the following. - The L6EC whose serial number (first six digits) is "*****2" or later- EN

The L series CPU serial numbers with upper 5 digits of "14112" or later indicate compatibility with LJ71E71-100.

It is fixed to 32 points from 10 to 2F.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

71-80 of Total 105

prev 8 / 11page next

Simultaneous broadcast reception setting for built-in Ethernet port LCPU

To receive simultaneous broadcast using UDP, set the parameters as follows. - Destination IP Address: FF.FF.FF.FFh - Destination Port No.: Other than FFFFh (... More Details >>
- No：22772
- Release Date：2018/09/03 17:30
Conversion speed of L60AD4

The conversion speed is as follows. - High speed: 20 microseconds per channel- Medium speed: 80 microseconds per channel- Low speed: 1 millisecond per channel More Details >>
- No：22776
- Release Date：2018/09/03 17:30
Precautions for use of SD memory card

Yes. Note that SD memory cards are formatted at the factory. If an SD memory card needs to be reformatted, format it using the CPU module. More Details >>
- No：22779
- Release Date：2018/09/03 17:30
Number of connectable modules

Up to 10 modules are connectable. Note that RS-232 adapter and END cover are excluded. Use the built-in CC-Link function for I/O enhancement. More Details >>
- No：22802
- Release Date：2018/09/03 17:30
Logging data storage in a USB memory

GX LogViewer function of Mitsubishi GOT (GT16) extracts the logging data to a USB memory attached to the USB interface on the front of the GOT. More Details >>
- No：22730
- Release Date：2018/09/03 17:29
Configuration of simple PLC communication function using LCPU

At least one L series CPU is necessary when using the simple PLC communication function. More Details >>
- No：22747
- Release Date：2018/09/03 17:29
The number of LCPU extension blocks

(1) The number of modules to be connected- Main block: up to 10 modules- Extension block: up to 11 modules(2) The number of extension blocks- L02CPU, L02CPU-... More Details >>
- No：22750
- Release Date：2018/09/03 17:29
Use of END cover with the branch module and extension module

Use an END cover applicable to the following. - The L6EC whose serial number (first six digits) is "*****2" or later- END cover with ERR terminal (optional i... More Details >>
- No：22815
- Release Date：2018/09/03 17:30
Versions of LCPU compatible with LJ71E71-100

The L series CPU serial numbers with upper 5 digits of "14112" or later indicate compatibility with LJ71E71-100. More Details >>
- No：22770
- Release Date：2018/09/03 17:30
Number of points used for I/O assignment of L26CPU-(P)BT built-in CC-Link function

It is fixed to 32 points from 10 to 2F. More Details >>
- No：22777
- Release Date：2018/09/03 17:30

71-80 of Total 105

Inquiries

page top