The initial version and subsequent versions of L series CPU support the SNTP function.

The KeepAlive setting for the built-in Ethernet port in the L series is fixed. The setting is unchangeable.

Yes. Recommended products are listed in the technical bulletin FA-A-0078.

The values are updated at the timing described below. - Current feed value: 0.9 ms - Machine feed value: 0.9 ms

GX LogViewer function of Mitsubishi GOT (GT16) extracts the logging data to a USB memory attached to the USB interface o

The boot operation from the standard ROM is not possible. The program memory of LCPU is a flash ROM. Thus, writing in th

The auto logging function and backup function cannot be used simultaneously. The backup function must be used after the

Up to 10 modules can be connected in the system as a whole except for the power supply module, CPU module, display unit,

To receive simultaneous broadcast using UDP, set the parameters as follows. - Destination IP Address: FF.FF.FF.FFh - Des

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

71-80 of Total 105

prev 8 / 11page next

Versions of built-in Ethernet port LCPU compatible with SNTP function

The initial version and subsequent versions of L series CPU support the SNTP function. More Details >>
- No：22769
- Release Date：2018/09/03 17:30
Operation during power failure

It stops during execution. More Details >>
- No：22764
- Release Date：2018/09/03 17:30
KeepAlive setting for built-in Ethernet port in LCPU

The KeepAlive setting for the built-in Ethernet port in the L series is fixed. The setting is unchangeable. More Details >>
- No：22760
- Release Date：2018/09/03 17:30
Use of a commercial SD memory card in L series logging function

Yes. Recommended products are listed in the technical bulletin FA-A-0078.　 More Details >>
- No：22753
- Release Date：2018/09/03 17:29
- Update：2018/10/03 16:25
Update timing of LD75 current feed value and machine feed value

The values are updated at the timing described below. - Current feed value: 0.9 ms - Machine feed value: 0.9 ms More Details >>
- No：22748
- Release Date：2018/09/03 17:29
Logging data storage in a USB memory

GX LogViewer function of Mitsubishi GOT (GT16) extracts the logging data to a USB memory attached to the USB interface on the front of the GOT. More Details >>
- No：22730
- Release Date：2018/09/03 17:29
Boot operation from the standard ROM

The boot operation from the standard ROM is not possible. The program memory of LCPU is a flash ROM. Thus, writing in the program memory achieves a ROM opera... More Details >>
- No：22728
- Release Date：2018/09/03 17:29
Simultaneous use of auto logging and backup functions

The auto logging function and backup function cannot be used simultaneously. The backup function must be used after the logging function is stopped. (A singl... More Details >>
- No：22819
- Release Date：2018/09/03 17:30
Maximum number of connectable modules to LCPU when it is not extended

Up to 10 modules can be connected in the system as a whole except for the power supply module, CPU module, display unit, RS232C adapter, and END cover. Some ... More Details >>
- No：22775
- Release Date：2018/09/03 17:30
Simultaneous broadcast reception setting for built-in Ethernet port LCPU

To receive simultaneous broadcast using UDP, set the parameters as follows. - Destination IP Address: FF.FF.FF.FFh - Destination Port No.: Other than FFFFh (... More Details >>
- No：22772
- Release Date：2018/09/03 17:30

71-80 of Total 105

Inquiries

page top