The contents of the standard RAM and latch devices are not erased if the battery replacement is completed within three m

GX Developer Version 8.89T or later is supported.There are restrictions in some functions. For the details, refer to "P

The built-in Ethernet port is not compatible with a 4E frame. Use a QnA-compatible 3E frame.

No. It is necessary to configure one port to use the MELSOFT connection.

The heater disconnection detection function monitors the heater current on the transistor output. If no current flows wh

The error history will be deleted.

The conversion speed is as follows. - High speed: 20 microseconds per channel- Medium speed: 80 microseconds per channel

The maximum length between a hub and a node is 100 m. The max. length connectable to a hub is 200m.When repeater hubs ar

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

1-10 of Total 105

prev 1 / 11page next

File switching timing of L series logging function

No. More Details >>
- No：22809
- Release Date：2018/09/03 17:30
Battery replacement for LCPU

The contents of the standard RAM and latch devices are not erased if the battery replacement is completed within three minutes, which is the backup power tim... More Details >>
- No：22733
- Release Date：2018/09/03 17:29
GX Developer support by LCPU

GX Developer Version 8.89T or later is supported.There are restrictions in some functions. For the details, refer to "Precautions on L Series Modules" in ... More Details >>
- No：22792
- Release Date：2018/09/03 17:30
- Update：2018/10/03 16:26
MC protocol compatibility of the built-in Ethernet port

The built-in Ethernet port is not compatible with a 4E frame. Use a QnA-compatible 3E frame. More Details >>
- No：22732
- Release Date：2018/09/03 17:29
Open setting of LCPU

No. It is necessary to configure one port to use the MELSOFT connection. More Details >>
- No：22765
- Release Date：2018/09/03 17:30
Loop disconnection detection function and heater disconnection detection function of temperature control module

The heater disconnection detection function monitors the heater current on the transistor output. If no current flows when the transistor is ON, it is consi... More Details >>
- No：22773
- Release Date：2018/09/03 17:30
- Update：2018/09/22 10:58
Battery model

Q6BAT. More Details >>
- No：22780
- Release Date：2018/09/03 17:30
Turning OFF the power with the battery error occurring

The error history will be deleted. More Details >>
- No：22734
- Release Date：2018/09/03 17:29
Conversion speed of L60AD4

The conversion speed is as follows. - High speed: 20 microseconds per channel- Medium speed: 80 microseconds per channel- Low speed: 1 millisecond per channel More Details >>
- No：22776
- Release Date：2018/09/03 17:30
Cable length to connect to built-in Ethernet port in LCPU

The maximum length between a hub and a node is 100 m. The max. length connectable to a hub is 200m.When repeater hubs are used in cascade connection, the max... More Details >>
- No：22781
- Release Date：2018/09/03 17:30

1-10 of Total 105

Inquiries

page top