The LCPU error code 4116 is displayed when a built-in I/O instruction that is disabled in the parameter setting is execu

The error code "2100" is "SP.UNIT LAY ERR.". This error may be caused by one of the following factors. (1) An intellige

The error code "2200" is "MISSING PARA.". The causes of the error are described below. (1) The necessary parameter file

The heater disconnection detection function monitors the heater current on the transistor output. If no current flows wh

The clock setting of the CPU module is set automatically in accordance with the clock data collected from the time infor

If comments cannot be stored in the program memory, write them in the standard ROM or a memory card. Calculate the memor

This function allows data communications between specified devices at the specified timing, using the built-in Ethernet.

The bits 0 to F of the special register SD1286 (Receive state signal) correspond to the connection numbers 1 to 16. When

The bits 0 to F of the special register SD1282 (Open completion signal) correspond to the connection numbers 1 to 16. Wh

NTP and SNTP are compatible. Therefore, an NTP server can be used for clock setting.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-L Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ MELSEC-L Series ]

1-10 of Total 105

prev 1 / 11page next

Remedy for LCPU error "4116"

The LCPU error code 4116 is displayed when a built-in I/O instruction that is disabled in the parameter setting is executed. Check for the parameter settings... More Details >>
- No：22807
- Release Date：2018/09/03 17:30
Error code "2100" in LCPU

The error code "2100" is "SP.UNIT LAY ERR.". This error may be caused by one of the following factors. (1) An intelligent function module is assigned as a... More Details >>
- No：22725
- Release Date：2018/09/03 17:29
- Update：2018/09/21 17:02
Error code "2200" in LCPU

The error code "2200" is "MISSING PARA.". The causes of the error are described below. (1) The necessary parameter file does not exist in all drives. (2) ... More Details >>
- No：22749
- Release Date：2018/09/03 17:29
- Update：2018/09/22 09:12
Loop disconnection detection function and heater disconnection detection function of temperature control module

The heater disconnection detection function monitors the heater current on the transistor output. If no current flows when the transistor is ON, it is consi... More Details >>
- No：22773
- Release Date：2018/09/03 17:30
- Update：2018/09/22 10:58
CPU clock setting by SNTP functions via built-in Ethernet port in LCPU

The clock setting of the CPU module is set automatically in accordance with the clock data collected from the time information server (SNTP server) on the LAN. More Details >>
- No：22736
- Release Date：2018/09/03 17:29
PLC write not possible due to memory overload

If comments cannot be stored in the program memory, write them in the standard ROM or a memory card. Calculate the memory capacity in GX Works2 or GX Develop... More Details >>
- No：22767
- Release Date：2018/09/03 17:30
Simple PLC communication function

This function allows data communications between specified devices at the specified timing, using the built-in Ethernet. Device data such as production data ... More Details >>
- No：22737
- Release Date：2018/09/03 17:29
SD1286 of LCPU with built-in Ethernet port

The bits 0 to F of the special register SD1286 (Receive state signal) correspond to the connection numbers 1 to 16. When it receives data, the corresponding ... More Details >>
- No：22786
- Release Date：2018/09/03 17:30
SD1282 of LCPU with built-in Ethernet port

The bits 0 to F of the special register SD1282 (Open completion signal) correspond to the connection numbers 1 to 16. When the open processing is completed, ... More Details >>
- No：22751
- Release Date：2018/09/03 17:29
NTP support by the SNTP function of LCPU with built-in Ethernet port

NTP and SNTP are compatible. Therefore, an NTP server can be used for clock setting. More Details >>
- No：22744
- Release Date：2018/09/03 17:29

1-10 of Total 105

Inquiries

page top