You can set the parameters of the FL-net interface module with the data operation of the intelligent function module. F

Ground FG in each station. SLD and FG are internally short-circuited.

Major differences are shown below. - AJ65SBTB1-32DT1 <Input specifications> - Input type positive common (sin

Local stations also need parameter settings.

There is no problem in writing/reading data into/from the buffer memory using a FROM/TO instruction with the refresh dev

The number of disconnections detected can be checked by reading the buffer memory address 5203H (Disconnection detection

A terminating resistor must be connected to the interface in order to reduce signal reflections thus preventing the sign

The resistance value is 110 ohm, 1/2 W.

"[ ]" in the CC-Link remote I/O modules' model name "AJ65[ ]BT" represents as follows: - None: Standard type - S: C

Carry out DTR and DSR wiring that returns signals on QJ71C24N(-R2).

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > Network related products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network related products ]

101-110 of Total 110

prev 11 / 11page next

FL-net setting of GX Works2

You can set the parameters of the FL-net interface module with the data operation of the intelligent function module. For details and operation procedure of... More Details >>
- No：23084
- Release Date：2018/09/03 17:31
- Update：2018/09/26 13:19
SLD and FG wiring for CC-Link networks

Ground FG in each station. SLD and FG are internally short-circuited. More Details >>
- No：23020
- Release Date：2018/09/03 17:31
Difference between AJ65SBTB1-32DTE1 and AJ65SBTB1-32DT1

Major differences are shown below. - AJ65SBTB1-32DT1 - Input type positive common (sink type) - Rated input current approx. 5 mA - ON voltage/ON curr... More Details >>
- No：23022
- Release Date：2018/09/03 17:31
- Update：2018/09/26 09:52
Parameter settings for a CC-Link master station and local stations

Local stations also need parameter settings. More Details >>
- No：22991
- Release Date：2018/09/03 17:31
Read and write operations for CC-Link buffer memory

There is no problem in writing/reading data into/from the buffer memory using a FROM/TO instruction with the refresh device setting left blank.The refresh de... More Details >>
- No：23015
- Release Date：2018/09/03 17:31
Detecting the number of disconnections when using QJ71E71-100

The number of disconnections detected can be checked by reading the buffer memory address 5203H (Disconnection detection count). Disconnections are detected ... More Details >>
- No：23003
- Release Date：2018/09/03 17:31
- Update：2018/09/25 17:49
Terminating resistors for QJ71C24N

A terminating resistor must be connected to the interface in order to reduce signal reflections thus preventing the signal instabilities. More Details >>
- No：22982
- Release Date：2018/09/03 17:31
Terminating resistors for RS-485 communication of QJ71C24N

The resistance value is 110 ohm, 1/2 W. More Details >>
- No：22978
- Release Date：2018/09/03 17:31
- Update：2018/10/03 15:48
Difference in specifications between "AJ65BT" and "AJ65SBT" in CC-Link remote I/O modules' model names

"[ ]" in the CC-Link remote I/O modules' model name "AJ65[ ]BT" represents as follows: - None: Standard type - S: Compact type - F: Low profile waterpro... More Details >>
- No：22974
- Release Date：2018/09/03 17:31
- Update：2018/09/25 17:12
Connecting QJ71C24N to an external device that has no DTR signal

Carry out DTR and DSR wiring that returns signals on QJ71C24N(-R2). More Details >>
- No：23039
- Release Date：2018/09/03 17:31

101-110 of Total 110

Inquiries

page top