For any type of MELSECNET network (II, /10, and H), B and W devices with the same number cannot be used for multiple sta

The QJ71C24N series modules can be accessed using A-compatible 1C frames, but the following restrictions are imposed. Th

The refresh device setting of the CC-Link parameter assigns any devices to the I/O numbers greater than those assigned t

Use the cables that meet the IEC60793-2-10 Types A1a.1 optical fiber standard. The connectors are LC (duplex) connectors

A link error has occurred in one of the slave stations in connection.Master station: Check the parameter again.Slave sta

Major differences are shown below. - AJ65SBTB1-32DT- Leakage current at OFF 0.25 mA or lower- Protection function (overl

Ver.1.10 is a standard where CC-Link station-to-station cable length restriction in Ver. 1.00 has been removed, and the

Cyclic data is sometimes separated into new and old data by two words (32 bits) with auto refresh timing. Checking "Bloc

Make the expanded cyclic setting for a CC-Link local station using the programming tool, GX Developer or GX Works2. Foll

There is no problem in writing/reading data into/from the buffer memory using a FROM/TO instruction with the refresh dev

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > Network related products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network related products ]

41-50 of Total 110

prev 5 / 11page next

Link register assignments in MELSECNET/10 networks

For any type of MELSECNET network (II, /10, and H), B and W devices with the same number cannot be used for multiple stations as write areas. Following th... More Details >>
- No：22971
- Release Date：2018/09/03 17:31
- Update：2018/09/25 13:24
Whether or not MC protocol frames can be used after A1SJ71UC24 is replaced with QJ71C24N

The QJ71C24N series modules can be accessed using A-compatible 1C frames, but the following restrictions are imposed. The access is limited to the devices wi... More Details >>
- No：22970
- Release Date：2018/09/03 17:31
How refresh devices for CC-Link remote inputs and outputs are assigned

The refresh device setting of the CC-Link parameter assigns any devices to the I/O numbers greater than those assigned to the modules on the same base unit. ... More Details >>
- No：22968
- Release Date：2018/09/03 17:31
CC-Link IE Controller cable standard

Use the cables that meet the IEC60793-2-10 Types A1a.1 optical fiber standard. The connectors are LC (duplex) connectors. Two cores are required.The core di... More Details >>
- No：23032
- Release Date：2018/09/03 17:31
- Update：2018/09/27 12:14
What makes the ERR LED flash in a CC-Link network

A link error has occurred in one of the slave stations in connection.Master station: Check the parameter again.Slave station: Reassess the power supply, the ... More Details >>
- No：23023
- Release Date：2018/09/03 17:31
Difference between AJ65SBTB1-32DT and AJ65SBTB1-32DT2

Major differences are shown below. - AJ65SBTB1-32DT- Leakage current at OFF 0.25 mA or lower- Protection function (overload protection, overvoltage protectio... More Details >>
- No：22985
- Release Date：2018/09/03 17:31
Difference in specifications between CC-Link versions

Ver.1.10 is a standard where CC-Link station-to-station cable length restriction in Ver. 1.00 has been removed, and the length of all station-to-station cabl... More Details >>
- No：22975
- Release Date：2018/09/03 17:31
Refresh timing of bit data and word data in the same CC-Link station

Cyclic data is sometimes separated into new and old data by two words (32 bits) with auto refresh timing. Checking "Block data assurance per station" of the ... More Details >>
- No：23058
- Release Date：2018/09/03 17:31
How to make the expanded cyclic setting for CC-Link local stations

Make the expanded cyclic setting for a CC-Link local station using the programming tool, GX Developer or GX Works2. Follow the procedure below. (1) Set th... More Details >>
- No：23030
- Release Date：2018/09/03 17:31
- Update：2018/09/26 10:17
Read and write operations for CC-Link buffer memory

There is no problem in writing/reading data into/from the buffer memory using a FROM/TO instruction with the refresh device setting left blank.The refresh de... More Details >>
- No：23015
- Release Date：2018/09/03 17:31

41-50 of Total 110

Inquiries

page top