Make the expanded cyclic setting for a CC-Link local station using the programming tool, GX Developer or GX Works2. Foll

Check the following signals.- Module error signal : X0- Host data link status signal: X1- Other station data link s

There is no problem in writing/reading data into/from the buffer memory using a FROM/TO instruction with the refresh dev

Receiving data overwrites the buffer memory data. Writing 0 with a program can be performed but is unnecessary as the da

Q02(H)CPU-A is the AnUCPU equivalent. When establishing a MELSECNET/10 network, set the refresh parameter with which SB

The number of disconnections detected can be checked by reading the buffer memory address 5203H (Disconnection detection

If the remote net Ver.1 mode is used, each station number is given fixed buffer memory addresses.If the remote net Ver.2

No, it is unnecessary. Terminating resistors are only required at both ends of the network.

Use a T-branch repeater module instead of a terminal block.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > Network related products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network related products ]

51-60 of Total 110

prev 6 / 11page next

How to make the expanded cyclic setting for CC-Link local stations

Make the expanded cyclic setting for a CC-Link local station using the programming tool, GX Developer or GX Works2. Follow the procedure below. (1) Set th... More Details >>
- No：23030
- Release Date：2018/09/03 17:31
- Update：2018/09/26 10:17
CC-Link signals checked when an error occurs

Check the following signals.- Module error signal : X0- Host data link status signal: X1- Other station data link status signal: X3 More Details >>
- No：23021
- Release Date：2018/09/03 17:31
Read and write operations for CC-Link buffer memory

There is no problem in writing/reading data into/from the buffer memory using a FROM/TO instruction with the refresh device setting left blank.The refresh de... More Details >>
- No：23015
- Release Date：2018/09/03 17:31
Clearing data in the QJ71C24N's receiving area buffer memory

Receiving data overwrites the buffer memory data. Writing 0 with a program can be performed but is unnecessary as the data is overwritten. More Details >>
- No：23009
- Release Date：2018/09/03 17:31
About network parameters when building MELSECNET/10 with Q02HCPU-A

Q02(H)CPU-A is the AnUCPU equivalent. When establishing a MELSECNET/10 network, set the refresh parameter with which SB/SW data is transferred to "Y/D" or o... More Details >>
- No：23005
- Release Date：2018/09/03 17:31
- Update：2018/09/26 14:42
Detecting the number of disconnections when using QJ71E71-100

The number of disconnections detected can be checked by reading the buffer memory address 5203H (Disconnection detection count). Disconnections are detected ... More Details >>
- No：23003
- Release Date：2018/09/03 17:31
- Update：2018/09/25 17:49
Connecting terminating resistors to the sending end and the receiving end in communication of QJ71C24N

Yes. More Details >>
- No：22998
- Release Date：2018/09/03 17:31
Buffer memory addresses of CC-Link modules

If the remote net Ver.1 mode is used, each station number is given fixed buffer memory addresses.If the remote net Ver.2 mode is used, different buffer memor... More Details >>
- No：22992
- Release Date：2018/09/03 17:31
Necessity of terminating resistors in CC-Link communication

No, it is unnecessary. Terminating resistors are only required at both ends of the network. More Details >>
- No：22966
- Release Date：2018/09/03 17:31
How to relay CC-Link cables

Use a T-branch repeater module instead of a terminal block. More Details >>
- No：23086
- Release Date：2018/09/03 17:31

51-60 of Total 110

Inquiries

page top