All stations communication error of a slave station.When POWER of the slave station is off, check if 24 V DC has been su

There is no restriction on the positions of a master station and slave stations where they are connected. (Stations are

- Reserved station Reserved stations are not actually connected to the network (but will be connected in the future

Transient transmission is a function that allows communication with programmable controllers in other stations. Communic

The MODE switch can set the following modes.- 0 to 4: Online mode- 5 to 9: Line test mode- A to E: Hardware test modeEac

Cyclic data is sometimes separated into new and old data by two words (32 bits) with auto refresh timing. Checking "Bloc

For any type of MELSECNET network (II, /10, and H), B and W devices with the same number cannot be used for multiple sta

CC-Link IE, supported by the CC-Link Partner Association, is an open field network standard that integrates networks, fr

Make the expanded cyclic setting for a CC-Link local station using the programming tool, GX Developer or GX Works2. Foll

Major differences in input specifications are shown below. - AJ65SBTB1-16DT - Rated input current approx. 7 mA - ON vol

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > Network related products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network related products ]

81-90 of Total 110

prev 9 / 11page next

Cause to turn on the ERR LED of a CC-Link master module

All stations communication error of a slave station.When POWER of the slave station is off, check if 24 V DC has been supplied.When POWER is on, check the st... More Details >>
- No：23079
- Release Date：2018/09/03 17:31
Order in which a CC-Link master module and slave stations are connected

There is no restriction on the positions of a master station and slave stations where they are connected. (Stations are not required to be connected in order... More Details >>
- No：23041
- Release Date：2018/09/03 17:31
Difference between CC-Link reserved stations and invalid stations

- Reserved station Reserved stations are not actually connected to the network (but will be connected in the future) but do not appear as data link error... More Details >>
- No：22993
- Release Date：2018/09/03 17:31
- Update：2018/09/25 17:37
Transient transmission of the CC-Link IE Controller

Transient transmission is a function that allows communication with programmable controllers in other stations. Communication with programmable controllers i... More Details >>
- No：23016
- Release Date：2018/09/03 17:31
MODE switch setting for QJ61BT11N

The MODE switch can set the following modes.- 0 to 4: Online mode- 5 to 9: Line test mode- A to E: Hardware test modeEach mode in ascending order of set valu... More Details >>
- No：23025
- Release Date：2018/09/03 17:31
Refresh timing of bit data and word data in the same CC-Link station

Cyclic data is sometimes separated into new and old data by two words (32 bits) with auto refresh timing. Checking "Block data assurance per station" of the ... More Details >>
- No：23058
- Release Date：2018/09/03 17:31
Link register assignments in MELSECNET/10 networks

For any type of MELSECNET network (II, /10, and H), B and W devices with the same number cannot be used for multiple stations as write areas. Following th... More Details >>
- No：22971
- Release Date：2018/09/03 17:31
- Update：2018/09/25 13:24
Difference between networks called CC-Link and those called MELSEC

CC-Link IE, supported by the CC-Link Partner Association, is an open field network standard that integrates networks, from a controller network to field/moti... More Details >>
- No：23013
- Release Date：2018/09/03 17:31
How to make the expanded cyclic setting for CC-Link local stations

Make the expanded cyclic setting for a CC-Link local station using the programming tool, GX Developer or GX Works2. Follow the procedure below. (1) Set th... More Details >>
- No：23030
- Release Date：2018/09/03 17:31
- Update：2018/09/26 10:17
Difference between AJ65SBTB1-16DT and AJ65SBTB1-16DT1

Major differences in input specifications are shown below. - AJ65SBTB1-16DT - Rated input current approx. 7 mA - ON voltage/ON current 14 VDC or higher/... More Details >>
- No：23035
- Release Date：2018/09/03 17:31
- Update：2018/09/26 10:24

81-90 of Total 110

Inquiries

page top