Set the Network Parameter as shown below. (1) If QJ61BT11 is in the remote net mode, use the remote net Ver.1 mode for

Ver.1.10 is a standard where CC-Link station-to-station cable length restriction in Ver. 1.00 has been removed, and the

The resistance value is 110 ohm, 1/2 W.

The CC-Link IE Controller Network is an improved system that has a higher processing speed and a larger data capacity th

If the parameter is set, the following number of modules can be mounted at maximum. - Q00UJ/Q00U/Q01UCPU: Up to 2 modu

A terminating resistor must be connected to the interface in order to reduce signal reflections thus preventing the sign

Mixed communication with the same hub cannot be established. Establish the CC-Link IE Field Network and general LAN comm

If the remote net Ver.1 mode is used, each station number is given fixed buffer memory addresses.If the remote net Ver.2

The CC-Link remote I/O modules' model names represents as follows:- AJ65SBTB1 - S: Compact type - B1: 1-wire terminal

- If the Network Parameter is used Make "Station Information Setting". - If the parameter is set using a dedica

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > Network related products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network related products ]

1-10 of Total 110

prev 1 / 11page next

Precautions taken when QJ61BT11 is replaced with QJ61BT11N

Set the Network Parameter as shown below. (1) If QJ61BT11 is in the remote net mode, use the remote net Ver.1 mode for QJ61BT11N. (2) If QJ61BT11 is in the... More Details >>
- No：22967
- Release Date：2018/09/03 17:31
- Update：2018/09/25 13:20
Difference in specifications between CC-Link versions

Ver.1.10 is a standard where CC-Link station-to-station cable length restriction in Ver. 1.00 has been removed, and the length of all station-to-station cabl... More Details >>
- No：22975
- Release Date：2018/09/03 17:31
Terminating resistors for RS-485 communication of QJ71C24N

The resistance value is 110 ohm, 1/2 W. More Details >>
- No：22978
- Release Date：2018/09/03 17:31
- Update：2018/10/03 15:48
Difference between the CC-Link IE Controller Network and a MELSECNET/H network

The CC-Link IE Controller Network is an improved system that has a higher processing speed and a larger data capacity than the MELSECNET/H network system (PL... More Details >>
- No：22979
- Release Date：2018/09/03 17:31
- Update：2018/09/25 17:17
The number of CC-Link modules mountable with a universal model QCPU module

If the parameter is set, the following number of modules can be mounted at maximum. - Q00UJ/Q00U/Q01UCPU: Up to 2 modules - Q02UCPU: Up to 4 modules - Uni... More Details >>
- No：22981
- Release Date：2018/09/03 17:31
- Update：2018/09/25 17:20
Terminating resistors for QJ71C24N

A terminating resistor must be connected to the interface in order to reduce signal reflections thus preventing the signal instabilities. More Details >>
- No：22982
- Release Date：2018/09/03 17:31
Mixing the CC-Link IE Field Network with general LAN communication

Mixed communication with the same hub cannot be established. Establish the CC-Link IE Field Network and general LAN communication separately. More Details >>
- No：22988
- Release Date：2018/09/03 17:31
- Update：2019/06/27 15:48
Buffer memory addresses of CC-Link modules

If the remote net Ver.1 mode is used, each station number is given fixed buffer memory addresses.If the remote net Ver.2 mode is used, different buffer memor... More Details >>
- No：22992
- Release Date：2018/09/03 17:31
Difference in specifications between "AJ65SBTB1" and "AJ65SBTB2" in CC-Link remote I/O modules' model names

The CC-Link remote I/O modules' model names represents as follows:- AJ65SBTB1 - S: Compact type - B1: 1-wire terminal block, 1-common type- AJ65SBTB2 - S:... More Details >>
- No：22994
- Release Date：2018/09/03 17:31
How to set CC-Link reserved stations

- If the Network Parameter is used Make "Station Information Setting". - If the parameter is set using a dedicated instruction Set the control data of... More Details >>
- No：22996
- Release Date：2018/09/03 17:31
- Update：2018/09/25 17:41

1-10 of Total 110

Inquiries

page top