Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check cu

In the FX3U/FX3UC series, a bit in a word device can be specified. It can be specified by "Word device (D only) + Decim

M384 to M1535 and D128 to D1099 can be latched. M1536 to M7679, D1100 to D7999, and R0 to R23999 can be used as latch a

(1) If only GX Developer is used - The operation cannot be carried out for ladder programs. - For device comm

To check the version of the MELSEC-F series, connect GX Works2 (personal computer) or HPP to a programmable controller,

In the FX programmable controllers (FX3U/FX3UC series), a bit in a word device can be specified in a program. It can be

Check that the RST instruction of the high-speed counter is not executed while the program is running. For the high-spee

D200 to D7999 and R0 to R32767 can be latched. D200 to D511 can be set as non-latch areas in parameters. For details on

To establish communications between the programmable controller and GX Developer, clear the communication setting. (The

In the FX3U/FX3UC series, the bit specification of the data register is possible. (Example) D0.7→7th bit in D0 For the

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > Engineering Software

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Engineering Software ]

11-20 of Total 129

prev 2 / 13page next

Scan time while operation of a programmable controller CPU is being monitored using GX Works2

Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check current scan time, monitor the data in... More Details >>
- No：24779
- Release Date：2019/02/27 15:58
Using a specified bit (on/off) of a word device (D) as a condition for a contact

In the FX3U/FX3UC series, a bit in a word device can be specified. It can be specified by "Word device (D only) + Decimal point + Bit position (0 to F)". A... More Details >>
- No：22261
- Release Date：2018/08/30 13:48
Latch (backup) areas in the auxiliary relay (M), data register (D), and extended register (R) of the FX3G/FX3GC series

M384 to M1535 and D128 to D1099 can be latched. M1536 to M7679, D1100 to D7999, and R0 to R23999 can be used as latch areas by installing an optional batt... More Details >>
- No：24703
- Release Date：2019/02/27 08:59
File export of ladder programs

(1) If only GX Developer is used - The operation cannot be carried out for ladder programs. - For device comments, copy and paste operations can be carri... More Details >>
- No：22840
- Release Date：2018/09/03 17:30
- Update：2018/09/22 13:22
How to check the version of the MELSEC-F series

To check the version of the MELSEC-F series, connect GX Works2 (personal computer) or HPP to a programmable controller, and monitor the data in D8001. The l... More Details >>
- No：24772
- Release Date：2019/02/27 15:22
Turning on/off a specified bit of a word device (D) using a simple program

In the FX programmable controllers (FX3U/FX3UC series), a bit in a word device can be specified in a program. It can be specified as "word device (D only) + ... More Details >>
- No：25011
- Release Date：2019/04/23 11:13
Counting of a built-in high-speed counter

Check that the RST instruction ofthe high-speed counter is not executed whilethe program is running. Forthe high-speed counter which supports the external r... More Details >>
- No：24787
- Release Date：2019/02/28 09:06
Latch (backup) areas in the data register (D) and extended register (R) of the FX3U/FX3UC series

D200 to D7999 and R0 to R32767 can be latched. D200 to D511 can be set as non-latch areas in parameters. For details on the parameter setting, refer to the... More Details >>
- No：24699
- Release Date：2019/02/27 08:58
No communication between a programmable controller and a personal computer (GX Developer) after the communication parameters for the RS-232C communication equipment are set

To establish communications between the programmable controller and GX Developer, clear the communication setting. (The communication setting register value ... More Details >>
- No：24876
- Release Date：2019/04/15 08:07
Turning on a bit in the data register

In the FX3U/FX3UC series, the bit specification of the data register is possible. (Example) D0.7→7th bit in D0 For the other types of MELSEC-F programmable... More Details >>
- No：22275
- Release Date：2018/08/30 13:48

11-20 of Total 129

Inquiries

page top