Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check cu

To check the version of the MELSEC-F series, connect GX Works2 (personal computer) or HPP to a programmable controller,

GX Works2 with Ver. 1.87R or later is required.

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits from

Yes.Beginning with the device in the "Device/Label Automatic-Assign Setting" window, devices are assigned in descending

Check that the RST instruction of the high-speed counter is not executed while the program is running. For the high-spee

To establish communications between the programmable controller and GX Developer, clear the communication setting. (The

When you connect the built-in USB port of the FX3 series to the personal computer for the first time, you need to instal

For how to install a USB driver in Windows XP, refer to the following procedure. (1) Connect a personal computer and a

In the FX programmable controllers (FX3U/FX3UC series), a bit in a word device can be specified in a program. It can be

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > Engineering Software

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Engineering Software ]

11-20 of Total 129

prev 2 / 13page next

Scan time while operation of a programmable controller CPU is being monitored using GX Works2

Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check current scan time, monitor the data in... More Details >>
- No：24779
- Release Date：2019/02/27 15:58
How to check the version of the MELSEC-F series

To check the version of the MELSEC-F series, connect GX Works2 (personal computer) or HPP to a programmable controller, and monitor the data in D8001. The l... More Details >>
- No：24772
- Release Date：2019/02/27 15:22
Settings for the FX3U-ENET-ADP

GX Works2 with Ver. 1.87R or later is required.　 More Details >>
- No：24781
- Release Date：2019/02/27 16:10
Assignment of input/output numbers (MELSEC-F series)

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits from 0 to 7 → from 10 to 17 → from 20 to... More Details >>
- No：24868
- Release Date：2019/04/15 08:06
Automatically assigned devices in GX Works2

Yes.Beginning with the device in the "Device/Label Automatic-Assign Setting" window, devices are assigned in descending order (from the greatest device numbe... More Details >>
- No：22846
- Release Date：2018/09/03 17:30
Counting of a built-in high-speed counter

Check that the RST instruction ofthe high-speed counter is not executed whilethe program is running. Forthe high-speed counter which supports the external r... More Details >>
- No：24787
- Release Date：2019/02/28 09:06
No communication between a programmable controller and a personal computer (GX Developer) after the communication parameters for the RS-232C communication equipment are set

To establish communications between the programmable controller and GX Developer, clear the communication setting. (The communication setting register value ... More Details >>
- No：24876
- Release Date：2019/04/15 08:07
Communications using the built-in USB port of the FX3 series

When you connect the built-in USB port of the FX3 series to the personal computer for the first time, you need to install the USB driver into the personal co... More Details >>
- No：22273
- Release Date：2018/08/30 13:48
How to install a USB driver in Windows XP

For how to install a USB driver in Windows XP, refer to the following procedure. (1) Connect a personal computer and a programmable controller CPU with a ... More Details >>
- No：22933
- Release Date：2018/09/03 17:30
- Update：2018/09/22 16:59
Turning on/off a specified bit of a word device (D) using a simple program

In the FX programmable controllers (FX3U/FX3UC series), a bit in a word device can be specified in a program. It can be specified as "word device (D only) + ... More Details >>
- No：25011
- Release Date：2019/04/23 11:13

11-20 of Total 129

Inquiries

page top