When the total number of characters in the drive/path and project name exceeds 149 one-byte characters (74 two-byte char

Checking "Device Memory" does not read file registers. Switch the Target Memory for "PLC Data" to "Standard RAM" and che

To reopen project data written to a CD-R, copy the project data into a space such as a hard disk on the personal compute

It is impossible to access the GOT via a universal model QCPU module.

The constant scan initial value of GX Simulator is 100 ms. Thus, the value of SM410(0.1sec. clock) is OFF in each scan.

Yes. Execute conversion/compilation after changing the PLC type.

Yes. The device use list also displays the devices used for specifying digits, such as "K4M0" (including M1, M2, or othe

You do not have to change the device numbers for each station number in the initial setting procedure registration windo

Yes, you can. Select [Project] -> [Import file] -> [Import from xxxx format file] and specify a project file.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > Engineering Software

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Engineering Software ]

21-30 of Total 129

prev 3 / 13page next

I cannot open a project file of PX Developer.

When the total number of characters in the drive/path and project name exceeds 149 one-byte characters (74 two-byte characters), the message "The drive path ... More Details >>
- No：22947
- Release Date：2018/09/03 17:30
- Update：2018/09/25 10:58
Operation performed when file registers are read

Checking "Device Memory" does not read file registers. Switch the Target Memory for "PLC Data" to "Standard RAM" and check "File Register" in the Read from P... More Details >>
- No：22835
- Release Date：2018/09/03 17:30
Reading project data from a CD-R

To reopen project data written to a CD-R, copy the project data into a space such as a hard disk on the personal computer where the project data is used.This... More Details >>
- No：22861
- Release Date：2018/09/03 17:30
MX Sheet Version 2's compatibility with 64-bit Windows 7

Yes. More Details >>
- No：22866
- Release Date：2018/09/03 17:30
Access to a GOT

It is impossible to access the GOT via a universal model QCPU module. More Details >>
- No：22906
- Release Date：2018/09/03 17:30
Behavior of special relay in offline simulation

The constant scan initial value of GX Simulator is 100 ms. Thus, the value of SM410(0.1sec. clock) is OFF in each scan. To turn ON/OFF SM410, set the consta... More Details >>
- No：22922
- Release Date：2018/09/03 17:30
- Update：2018/09/22 16:39
Function blocks and PLC type change

Yes. Execute conversion/compilation after changing the PLC type. More Details >>
- No：22931
- Release Date：2018/09/03 17:30
Displaying devices in GX Works2

Yes. The device use list also displays the devices used for specifying digits, such as "K4M0" (including M1, M2, or others). More Details >>
- No：22942
- Release Date：2018/09/03 17:30
Device numbers set in the initial setting procedure registration window of the CC-Link remote device station

You do not have to change the device numbers for each station number in the initial setting procedure registration window. Example) When the AJ65SBT2B-64A... More Details >>
- No：22949
- Release Date：2018/09/03 17:30
- Update：2018/09/25 11:05
Can I open a program created with GX Developer in GX Works2?

Yes, you can. Select [Project]-> [Import file]-> [Import from xxxx format file] and specify a project file. More Details >>
- No：22957
- Release Date：2018/09/03 17:31
- Update：2018/09/25 12:13

21-30 of Total 129

Inquiries

page top