The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver.

On the Project view of the Navigation window, select "Parameter" → "PLC Parameter" using GX Works2 (or GX Developer). Cl

Standard counters offer counting up to 10Hz. For high-speed input signals which exceed 10Hz, use high-speed counters, i

Check that the RST instruction of the high-speed counter is not executed while the program is running. For the high-spe

The remote input device and the remote output device cannot be assigned in network parameters. To assign them, create a

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits fro

The FX3G series does not support the index modifier for the bit devices. The FX3U/FX3UC series supports this function.

Power off and on the programmable controller again after the communication setting is changed.

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later)

When an unimplemented input (X) or output (Y) number is used in a program, M8060 turns on. The first to third digits of

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > Engineering Software

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Engineering Software ]

51-60 of Total 129

prev 6 / 13page next

FX3U-ENET-ADP connectable programmable controllers in the MELSEC-F series

The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver. 3.10 or later). Products which are ... More Details >>
- No：24706
- Release Date：2019/02/27 09:00
Externally switching the operating status of a programmable controller

On the Project view of the Navigation window, select "Parameter" → "PLC Parameter" using GX Works2 (or GX Developer). Click the "PLC System(1)" tab, and set ... More Details >>
- No：24768
- Release Date：2019/02/27 15:01
Distinguishing the usage of standard counters and high-speed counters

Standard counters offer counting up to 10Hz. For high-speed input signals which exceed 10Hz, use high-speed counters,interruption function, or another proce... More Details >>
- No：24785
- Release Date：2019/02/27 16:31
Counting of a built-in high-speed counter

Check that the RST instruction ofthe high-speed counter is not executed whilethe program is running. Forthe high-speed counter which supports the external r... More Details >>
- No：24787
- Release Date：2019/02/28 09:06
Assignment of remote input device and remote output device of FX3U-16CCL-M

The remote input device and the remote output device cannot be assigned in network parameters. To assign them, create a program for updating data. For de... More Details >>
- No：24792
- Release Date：2019/02/28 09:08
Assignment of input/output numbers (MELSEC-F series)

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits from 0 to 7 → from 10 to 17 → from 20 to... More Details >>
- No：24868
- Release Date：2019/04/15 08:06
Index modifier of bit devices in the FX3G series

The FX3G series does not support the index modifier for the bit devices. The FX3U/FX3UC series supports this function. More Details >>
- No：24959
- Release Date：2019/04/18 14:35
Reflecting the changes in the communication setting

Power off and on the programmable controller again after the communication setting is changed. More Details >>
- No：25006
- Release Date：2019/04/23 11:11
Parameter setting of the FX3U-16CCL-M

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later) More Details >>
- No：25013
- Release Date：2019/04/23 11:16
I/O structure error in the MELSEC-F

When an unimplemented input (X) or output (Y) number is used in a program, M8060 turns on. The first to third digits of the numericalvalue stored in D8060 i... More Details >>
- No：22284
- Release Date：2018/08/30 13:48
- Update：2019/02/18 15:17

51-60 of Total 129

Inquiries

page top