Yes, you can. Select [Project] -> [Import file] -> [Import from xxxx format file] and specify a project file.

Yes. Execute conversion/compilation after changing the PLC type.

Function blocks can be dragged and dropped into the program main body of the program block, and become available in the

The number of FB definitions created in a project has no limitation.

It is a confirmation message telling a user that there is a device, T or C, that has become a duplicated coil in the sam

When an unimplemented input (X) or output (Y) number is used in a program, M8060 turns on. The first to third digits of

The communication format can be set in the communication setting of a sequence program or "PLC Parameter setting" using

Standard counters offer counting up to 10Hz. For high-speed input signals which exceed 10Hz, use high-speed counters, i

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data

The non-protocol communication can be set by the following two methods: (1) setting parameters using a programming tool,

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > Engineering Software

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Engineering Software ]

51-60 of Total 129

prev 6 / 13page next

Can I open a program created with GX Developer in GX Works2?

Yes, you can. Select [Project]-> [Import file]-> [Import from xxxx format file] and specify a project file. More Details >>
- No：22957
- Release Date：2018/09/03 17:31
- Update：2018/09/25 12:13
Function blocks and PLC type change

Yes. Execute conversion/compilation after changing the PLC type. More Details >>
- No：22931
- Release Date：2018/09/03 17:30
Dragging and dropping function blocks in a structured project

Function blocks can be dragged and dropped into the program main body of the program block, and become available in the program. More Details >>
- No：22910
- Release Date：2018/09/03 17:30
Creating function blocks

The number of FB definitions created in a project has no limitation. More Details >>
- No：22900
- Release Date：2018/09/03 17:30
A message that says "A T/C coil with the same No. exists."

It is a confirmation message telling a user that there is a device, T or C, that has become a duplicated coil in the same program and the coil is given the s... More Details >>
- No：22859
- Release Date：2018/09/03 17:30
I/O structure error in the MELSEC-F

When an unimplemented input (X) or output (Y) number is used in a program, M8060 turns on. The first to third digits of the numericalvalue stored in D8060 i... More Details >>
- No：22284
- Release Date：2018/08/30 13:48
- Update：2019/02/18 15:17
Communication format setting

The communication format can be set in the communication setting of a sequence program or "PLC Parameter setting" using GX Developer. To avoid setting troub... More Details >>
- No：24929
- Release Date：2019/04/17 11:42
Distinguishing the usage of standard counters and high-speed counters

Standard counters offer counting up to 10Hz. For high-speed input signals which exceed 10Hz, use high-speed counters,interruption function, or another proce... More Details >>
- No：24785
- Release Date：2019/02/27 16:31
Data backup failure

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data may be overwritten by execution of t... More Details >>
- No：24783
- Release Date：2019/02/27 16:16
Communication setting methods when the FX3U-232-BD is used

The non-protocol communication can be set by the following two methods: (1) setting parameters using a programming tool, such as GX Works2, or (2) writing da... More Details >>
- No：24773
- Release Date：2019/02/27 15:24

51-60 of Total 129

Inquiries

page top