The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later)

Yes. The device use list also displays the devices used for specifying digits, such as "K4M0" (including M1, M2, or othe

Power off and on the programmable controller again after the communication setting is changed.

To open a GX Developer project, select [Project] -> [Open Other Data] -> [Open Other Project] from the menu of GX

The constant scan initial value of GX Simulator is 100 ms. Thus, the value of SM410(0.1sec. clock) is OFF in each scan.

The communication format can be set in the communication setting of a sequence program or "PLC Parameter setting" using

The FX3G series does not support the index modifier for the bit devices. The FX3U/FX3UC series supports this function.

Applications created using MX Component Version 3 can be used, as they are, on a personal computer on which MX Component

Select [Compile] -> [Online Program Change] from the menu, and execute online change.

The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of t

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > Engineering Software

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Engineering Software ]

71-80 of Total 129

prev 8 / 13page next

Parameter setting of the FX3U-16CCL-M

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later) More Details >>
- No：25013
- Release Date：2019/04/23 11:16
Displaying devices in GX Works2

Yes. The device use list also displays the devices used for specifying digits, such as "K4M0" (including M1, M2, or others). More Details >>
- No：22942
- Release Date：2018/09/03 17:30
Reflecting the changes in the communication setting

Power off and on the programmable controller again after the communication setting is changed. More Details >>
- No：25006
- Release Date：2019/04/23 11:11
Opening SFC programs in GX Works2

To open a GX Developer project, select [Project] -> [Open Other Data] -> [Open Other Project] from the menu of GX Works2. More Details >>
- No：22878
- Release Date：2018/09/03 17:30
Behavior of special relay in offline simulation

The constant scan initial value of GX Simulator is 100 ms. Thus, the value of SM410(0.1sec. clock) is OFF in each scan. To turn ON/OFF SM410, set the consta... More Details >>
- No：22922
- Release Date：2018/09/03 17:30
- Update：2018/09/22 16:39
Communication format setting

The communication format can be set in the communication setting of a sequence program or "PLC Parameter setting" using GX Developer. To avoid setting troub... More Details >>
- No：24929
- Release Date：2019/04/17 11:42
Index modifier of bit devices in the FX3G series

The FX3G series does not support the index modifier for the bit devices. The FX3U/FX3UC series supports this function. More Details >>
- No：24959
- Release Date：2019/04/18 14:35
Compatibility between MX Component Version 3 and 4

Applications created using MX Component Version 3 can be used, as they are, on a personal computer on which MX Component Version 4 is installed. MX Component... More Details >>
- No：22839
- Release Date：2018/09/03 17:30
Setting online change in GX Works2

Select [Compile] -> [Online Program Change] from the menu, and execute online change. More Details >>
- No：22940
- Release Date：2018/09/03 17:30
- Update：2018/09/25 09:57
Operation processing time of the programmable controller

The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of the programmable controller used. More Details >>
- No：24997
- Release Date：2019/04/23 10:38

71-80 of Total 129

Inquiries

page top