Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications（LSPM-0075） The pr

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-dig

Please check the register addresses. The register address for the present value of the power factor of each phase is “

When [SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be change

It is unnecessary. (It is necessary to prepare an auxiliary power supply which supplies power between MA and MB.)

When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value wil

A reason varies with the connection situation of options. (Please refer to the section 6 of the User’s Manual.)

(A) Measurement values As for the measurement elements on the test mode screen, the set values are displayed. As for

This model is available for direct measurement of 400V loads at the STAR connection in Three-phase 3-wire system.

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This mode

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Power Management Meters

Electrical Indicators(57)

FAQ within [ Power Management Meters ]

11-20 of Total 57

prev 2 / 6page next

Sample program for MODBUS RTU communication （ME96SS series）

Sample programs are described in Programming Manual. Please refer to MODBUS Interface specifications（LSPM-0075） The programming manual can be downloaded fr... More Details >>
- No：24805
- Release Date：2019/03/27 12:12
- Category： Electrical Indicators
Active energy (lower digit indication) display upon communication test of MODBUS RTU/TCP communication (ME96SS series).

Regardless of setting, the value of the default digit length is replied. When the register address “1304” for 6-digit display is set, the value varies w... More Details >>
- No：22189
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:26
- Category： Electrical Indicators
Indication values of the main body is different from an obtained value through MODBUS RTU/ TCP (ME96SS series).

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register addre... More Details >>
- No：22191
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Set values cannot be changed on the setting mode (ME96SS series).

When[SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be changed. Pressing the buttons of the “Set” ... More Details >>
- No：22168
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:22
- Category： Electrical Indicators
Wiring for only measuring current (ME96SS series).

It is unnecessary. (It is necessary to prepare an auxiliary power supply which supplies power between MA and MB.) More Details >>
- No：22174
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:50
- Category： Electrical Indicators
Difference between measurement value of active power and calculated power value obtained from current, voltage and power factor (ME96SS series).

When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value will match with the displayed value.) A... More Details >>
- No：22178
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:56
- Category： Electrical Indicators
LCD COM is flashing (ME96SS series).

A reason varies with the connection situation of options. (Please refer to the section 6 of the User’s Manual.) In case of MODBUS RTU Error content: ... More Details >>
- No：22186
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:20
- Category： Electrical Indicators
Replied value on the communication operation test of test mode (ME96SS series).

(A) Measurement values As for the measurement elements on the test mode screen, the set values are displayed. As for the other measurement elements, 0 is ... More Details >>
- No：22185
- Release Date：2018/08/27 16:41
- Update：2020/04/13 09:17
- Category： Electrical Indicators
Availability for direct measurement of 400V loads (ME96SS series).

This model is available for direct measurement of 400V loads at the STAR connection in Three-phase 3-wire system. More Details >>
- No：22150
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Measurement value different from other measuring instrument (ME96SS series).

In general, in case of measurement by the average method, the waveform including harmonics cause large error. This model uses the RMS value method and measu... More Details >>
- No：22177
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:54
- Category： Electrical Indicators

11-20 of Total 57

Inquiries

page top