Operation at the reversed phase conne...
This model operates normally even at the reversed phase sequence. It is unnecessary to change wiring. More Details >>
Checking non-displayed digit of activ...
Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of active energy as follows. The measured ... More Details >>
Measuring harmonics range (ME96SS ser...
ME96SSHB-MB • Total harmonics and odd orders of harmonics from 1st to 31st •Effective value and distortion rate. • Harmonic current and Harmonic... More Details >>
Difference between measurement value ...
When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value will match with the displayed value.) A... More Details >>
Validation method for communication f...
This model has the test function of the communication operation. For detail, refer to User's Manual: Detailed Edition for setting. More Details >>
Availability for special primary curr...
This model is able to be used under unusual primary current and unusual primary voltage as long as the user sets each value within the selectable range as ... More Details >>
Setting upon delivery (ME96SS series).
It is not available. All configuration shall be conducted by the customer. More Details >>
The operating/storage temperature and...
Storage temperature range: -25 °C to +75 °C Operating temperature range: -5 °C to +55 °C (Average: 35 °C or lower) Operating humidity range: 0% to 85% an... More Details >>
Acquired values through MODBUS RTU.
The acquired value by communication should be multiplied by the multiplying factor to change into the measurement value. Please refer to Section 7.3 of ... More Details >>
Register address for active energy mo...
The acquired digit length of “1280”, “1281” and “1304” varies with the full load power. The acquired digit length of “1304” is 6-digit. Each of “1280” and... More Details >>
31-40 of Total 57