The expected lifetime is 10 years. Is recommended to replace the device every 10 year. However the environment of ins

MODBUS RTU communication and MODBUS TCP communication can be used at the same time.

It is not available. All configuration shall be conducted by the customer.

Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It i

In case of the input voltage of less than 11 V, the measurement values are as follows: Voltage: 0 V, Power supply: 0

It is possible to check them using the Data Acquisition Software EMU4-SW1. It is available for download without pay

An option for ME96NS series can NOT be installed to the main body of ME96SS series. An option for ME96SS series can NO

In a board installation state, the protection class is equivalent to IP50. This model is not waterproof.

There is a possibility of the wiring error for VT/CT to this model. Please check the wiring for VT/CT and this model.

The response speed of the analog output is 2 seconds or less. The response speed of harmonic measurement is 10 second

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Power Management Meters

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Power Management Meters

Electrical Indicators(57)

FAQ within [ Power Management Meters ]

41-50 of Total 57

prev 5 / 6page next

Recommended update period (ME96SS series).

The expected lifetime is 10 years. Is recommended to replace the device every 10 year. However the environment of installed location, such as temperature ... More Details >>
- No：22154
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:02
- Category： Electrical Indicators
Concurrent-use of MODBUS RTU and MODBUS TCP (ME96SS series).

MODBUS RTU communication and MODBUS TCP communication can be used at the same time. More Details >>
- No：22188
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Setting upon delivery (ME96SS series).

It is not available. All configuration shall be conducted by the customer. More Details >>
- No：22149
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:49
- Category： Electrical Indicators
Checking the set values (ME96SS series).

Pressing the buttons of the “Set” for 2 seconds or more shifts the mode to the “Setting Value Confirmation Mode”. It is impossible to change the set values... More Details >>
- No：22165
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Measurable minimum voltage (ME96SS series).

In case of the input voltage of less than 11 V, the measurement values are as follows: Voltage: 0 V,Power supply: 0 W, Reactive power: 0 var, Apparent pow... More Details >>
- No：22156
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:08
- Category： Electrical Indicators
Check the measurement values using MODBUS RTU communication

It is possible to check them using the Data Acquisition Software EMU4-SW1. It is available for download without payment from the following Web site. ... More Details >>
- No：37812
- Release Date：2020/04/10 15:10
- Category： Electrical Indicators
Availability of an option for ME96NS Series (ME96SS series).

An option for ME96NS series can NOT be installed to the main body of ME96SS series. An option for ME96SS series can NOT be installed to the main body of ME... More Details >>
- No：22167
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
IP protection class (ME96SS series).

In a board installation state, the protection class is equivalent to IP50. This model is not waterproof. More Details >>
- No：22158
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:13
- Category： Electrical Indicators
Error in the measurement value (ME96SS series).

There is a possibility of the wiring error for VT/CT to this model. Please check the wiring for VT/CT and this model. More Details >>
- No：22179
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Response speed of the analog output (ME96SS series).

The response speed of the analog output is 2 seconds or less. The response speed of harmonic measurement is 10 seconds or less. More Details >>
- No：22157
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:12
- Category： Electrical Indicators

41-50 of Total 57

Inquiries

page top