Setting upon delivery (ME96SS series).
It is not available. All configuration shall be conducted by the customer. More Details >>
Availability for special primary curr...
This model is able to be used under unusual primary current and unusual primary voltage as long as the user sets each value within the selectable range as ... More Details >>
Validation method for communication f...
This model has the test function of the communication operation. For detail, refer to User's Manual: Detailed Edition for setting. More Details >>
Difference between measurement value ...
When the AC waveform distorted due to harmonics, the value changes. (For AC without harmonics, the calculated value will match with the displayed value.) A... More Details >>
Measuring harmonics range (ME96SS ser...
ME96SSHB-MB • Total harmonics and odd orders of harmonics from 1st to 31st •Effective value and distortion rate. • Harmonic current and Harmonic... More Details >>
Checking non-displayed digit of activ...
Pressing buttons of the “+” and the “-” at the same time on the measurement screen for 2 seconds shifts the unit of active energy as follows. The measured ... More Details >>
Operation at the reversed phase conne...
This model operates normally even at the reversed phase sequence. It is unnecessary to change wiring. More Details >>
Display upon upper/lower limit alarm ...
The measurement elements, including the digital indication, the unit indication and the phase indication, flash. And the “ALARM” indication and the “HI” in... More Details >>
Set values cannot be changed on the s...
When[SET] is flashing, the “Setting Value Confirmation Mode” is selected. In this case, the set values cannot be changed. Pressing the buttons of the “Set” ... More Details >>
Availability of an option for ME96NS ...
An option for ME96NS series can NOT be installed to the main body of ME96SS series. An option for ME96SS series can NOT be installed to the main body of ME... More Details >>
21-30 of Total 57