Compatibility between the A series modules and Q series modules

When an ACPU module is replaced with a QCPU module, programs for the ACPU module can be used by changing the PLC type in GX Developer. However, the programs ... More Details >>

Setting of "Target MODBUS(R) device head number"

Set "(Last five digits of actual device number) - 1" for the Target MODBUS(R) device head number.Example) For the holding register 400018, set "17". More Details >>

GX Developer's compatibility with 32-bit Windows 7

GX Developer Version 8.91V or later supports 32-bit Windows 7. More Details >>

Production of Q61P-A1 and Q61P-A2

They have gone out of production. However, Q61P, a succeeding model, can be used in the same way. More Details >>

How to display local comments in GX Works2

In the "Reference/Reflection Target for Device Comment" window, switch the "Specify the Reference/Reflection" from "Global" to "Local". More Details >>

Memory allocation for online change

The scan time may be substantially longer. Continue the operation if there is no problem with the longer scan time. More Details >>

Duplicated coil error

The duplicated coil error is detected when SET instruction and RST instruction use the same device. More Details >>

CC-Link IE Controller cable standard

Use the cables that meet the IEC60793-2-10 Types A1a.1 optical fiber standard. The connectors are LC (duplex) connectors. Two cores are required.The core di... More Details >>

Setting required to skip CC-Link slave station numbers

A CC-Link slave station number can be skipped by assigning the skipped number to a reserved station. A reserved station is counted as one of all the connecte... More Details >>

Number of remote registers assigned to a remote I/O station

For "Remote Net(Ver.2 Mode)", the number of remote I/O's remote registers (RWw, RWr) is "0 Point". More Details >>