Cables connected to the Ethernet port on the universal model QCPU

If a direct connection is made, either type can be used.If making a connection via a hub, use a straight cable. More Details >>

Deleting GX Developer when installing GX Works2

GX Developer does not need deleting when GX Works2 is installed. More Details >>

Runtime license for MX Component

A runtime license is required for all personal computers on which MX Component operates. More Details >>

Accessing file registers from the built-in Ethernet port QCPU using A-compatible 1E frames

The QnUDE(H)CPU modules with serial numbers with upper 5 digits of "14112" or later indicate compatibility with the function. The accessible device range is ... More Details >>

Replacing Q02CPU with Q02H

Yes. More Details >>

Difference between Q24DHCCPU-V and Q12DCCPU-V

Hardware specifications are different. For hardware specifications, refer to the following manuals. - MELSEC-Q C Controller Module User's Manual - C Contro... More Details >>

The VxWorks simulator CW-SIM

CW-SIM is a simulation software that allows a VxWorks program to be executed on a personal computer without a C Controller module. There are two types of CW... More Details >>

USB cable type for CPU modules

It is type B. More Details >>

Settings of the built-in Ethernet port of the universal model QCPU

Make settings of the built-in Ethernet port in the [Built-in Ethernet Port Setting] tab of the PLC parameter in GX Works2 or GX Developer. More Details >>

Reading file registers simultaneously with the program, parameters, and other data in GX Works2

No. Switch the target memory for PLC Data and read the file registers alone. More Details >>