USB cable type for CPU modules

It is the miniB-type. More Details >>

Open setting of the built-in Ethernet port QCPU

No.It is necessary to configure one port to use the MELSOFT connection. More Details >>

COMMENT to disappear after a PLC type change

Copy the COMMENT into the MAIN of comments by program before changing the PLC type.The basic model QCPU cannot deal with common comments. More Details >>

Counting operation of QD62

The corresponding operation depends on the counter type selected. (1) If "Linear Counter" is selected If the present counter value exceeds the upper limi... More Details >>

CF cards supported by the high speed data logger module

For applicable CF cards, refer to the latest version of the following manual.- High Speed Data Logger Module User's Manual- SH-080818ENG- 2.3 Connection Syst... More Details >>

Setting of Q series registers whose data is held when a power failure occurs

Assign data registers (D) to Latch (1) or Latch (2) in the "Device Setting" window ([PLC Parameter] -> "Device Setting" window) to hold the data when a po... More Details >>

Boot operation from the standard ROM

The boot operation from the standard ROM is not possible.The program memory of universal model QCPU is a flash ROM.Thus, writing in the program memory achiev... More Details >>

Regarding program capacity

The program cache memory (capacity) of the MX-F model is 12 MB. ※12 MB is equivalent to over 200K steps. More Details >>

Regarding connection cable for GX Works3

It can be connected with a USB cable. The MX-F Model has a built-in USB Type-C port. More Details >>

Regarding the controller Line-up

The MX-F Model has the following features. More Details >>