NTP compatibility of the SNTP function of a built-in Ethernet port QCPU

Because NTP is compatible with SNTP, you can use an NTP server for the time setting. More Details >>

Detecting the connection between a built-in Ethernet port QCPU and hub

You can check the connection to the hub with bit 10 of the special register SD1288. When bit 10 of the SD1288 is on, the QCPU is in connection with the hub. More Details >>

MC protocol response messages

There are no settings for deleting the network number and PC number. More Details >>

Replacing personal computers with C Controller modules

The merits are as follows. (1) Downsized device The volume ratio is 1 to 10 in comparison with the VME card rack (6U) type. (2) Long-term stable supply... More Details >>

Update timing of QD75 current feed value and machine feed value

The values are updated at the timing described below.- Current feed value: 1.8 ms- Machine feed value: 56.8 ms More Details >>

USB cable type for CPU modules

It is the miniB-type. More Details >>

Opening a project in an old version of GX Developer

Products earlier than version 8.58L do not support a project in which the following parameters are set. All the parameters are set to their default values be... More Details >>

Print settings of the device list in GX Works2

When [Display Option] -> [Used devices] -> [Contact] and [Coil] are selected in the Device List window, devices used are not displayed. More Details >>

Runtime license for MX Component

A runtime license is required for all personal computers on which MX Component operates. More Details >>

Accessing file registers from the built-in Ethernet port QCPU using A-compatible 1E frames

The QnUDE(H)CPU modules with serial numbers with upper 5 digits of "14112" or later indicate compatibility with the function. The accessible device range is ... More Details >>