The following communication methods are available between built-in Ethernet port QCPU modules. - Socket communications

The contents of the program memory, the standard RAM, and latch devices are not erased if the battery replacement is com

You can set the parameters of the FL-net interface module with the data operation of the intelligent function module. Fo

In the TCP/IP connection, you can connect up to 17 MELSOFT products at the same time using a dedicated connection for sy

Short between SDA and RDA and between SDB and RDB, and then connect them to + (Data-A) and - (Data-B) on the external de

Carry out DTR and DSR wiring that returns signals on QJ71C24N(-R2).

Check the following points. (1) CC-Link cables have been properly connected. (2) Station numbers and the transmission s

There is no problem in writing/reading data into/from the buffer memory using a FROM/TO instruction with the refresh dev

For "Remote Net(Ver.2 Mode)", the number of remote I/O's remote registers (RWw, RWr) is "0 Point".

Set the Network Parameter as shown below. (1) If QJ61BT11 is in the remote net mode, use the remote net Ver.1 mode for Q

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1702)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

1081-1090 of Total 1110

prev 109 / 111page next

Communication between built-in Ethernet port QCPU modules

The following communication methods are available between built-in Ethernet port QCPU modules. - Socket communications are possible. - Communications equ... More Details >>
- No：22586
- Release Date：2018/09/03 17:29
- Update：2018/09/20 17:33
- Category： MELSEC-Q Series
Battery replacement for High-Performance model QCPU

The contents of the program memory, the standard RAM, and latch devices are not erased if the battery replacement is completed within three minutes, which is... More Details >>
- No：22568
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
FL-net setting of GX Works2

You can set the parameters of the FL-net interface module with the data operation of the intelligent function module. For details and operation procedure of... More Details >>
- No：23084
- Release Date：2018/09/03 17:31
- Update：2018/09/26 13:19
- Category： Network related products
Limitation on the number of MELSOFT products that can be connected with the QJ71E71

In the TCP/IP connection, you can connect up to 17 MELSOFT products at the same time using a dedicated connection for system and the connections for users 1 ... More Details >>
- No：23063
- Release Date：2018/09/03 17:31
- Category： Network related products
RS-485 connection between LJ71C24 and an external device

Short between SDA and RDA and between SDB and RDB, and then connect them to + (Data-A) and - (Data-B) on the external device. More Details >>
- No：23048
- Release Date：2018/09/03 17:31
- Category： Network related products
Connecting QJ71C24N to an external device that has no DTR signal

Carry out DTR and DSR wiring that returns signals on QJ71C24N(-R2). More Details >>
- No：23039
- Release Date：2018/09/03 17:31
- Category： Network related products
Links with a CC-Link local station cannot be made

Check the following points. (1) CC-Link cables have been properly connected. (2) Station numbers and the transmission speed have been correctly set. (3)... More Details >>
- No：23033
- Release Date：2018/09/03 17:31
- Update：2018/09/26 10:22
- Category： Network related products
Read and write operations for CC-Link buffer memory

There is no problem in writing/reading data into/from the buffer memory using a FROM/TO instruction with the refresh device setting left blank.The refresh de... More Details >>
- No：23015
- Release Date：2018/09/03 17:31
- Category： Network related products
Number of remote registers assigned to a remote I/O station

For "Remote Net(Ver.2 Mode)", the number of remote I/O's remote registers (RWw, RWr) is "0 Point". More Details >>
- No：22973
- Release Date：2018/09/03 17:31
- Category： Network related products
Precautions taken when QJ61BT11 is replaced with QJ61BT11N

Set the Network Parameter as shown below. (1) If QJ61BT11 is in the remote net mode, use the remote net Ver.1 mode for QJ61BT11N. (2) If QJ61BT11 is in the... More Details >>
- No：22967
- Release Date：2018/09/03 17:31
- Update：2018/09/25 13:20
- Category： Network related products

1081-1090 of Total 1110

Inquiries

page top